Specifications

576

FDR-H

Pin (B) Panel outer

frame

Panel inner frame

Pin (A)

Panel

inner frame

Remove

Panel

outer frame

(9) Installation of ornament panel

i) Accessory

ii) Installation procedures

(a) Remove the inner frame of panel

¡ How to remove the panel inner frame

1 Detach from pins (A) in the order of arrow 1→2.

2 Open slightly as the arrow 3 and move toward the arrow 4 and detach from pin (B).

Name Q'ty Position

Round head set

screw (M5 × 35)

4 pcs. Securing the panel

(b) Install the panel outer frame on the main unit.

¡ Steps of installation

1 Secure the panel tentatively with 2 of 4 panel set screws (panel accessory) as shown above.

2 When the panel is supported with a pair of set screws, slide it in the arrow direction.

[Note: Panel outer frame has the orientation.]

3 Lock the former 2 and remaining 2 set screws.

4 Install the panel inner frame in the reverse order of removal.

See installation manual which is equipped with canvas panel.

Main unit

Panel inner frame

Panel outer frame

Temporary

setting

Abt.

30 mm