Operating Manual
Table Of Contents
- SAFETY PRECAUTIONS
- REVISIONS
- SOFTWARE USER REGISTRATION
- INTRODUCTION
- CONTENTS
- About Manuals
- Generic Terms and Abbreviations Used in This Manual
- Product Makeup
- 1 OVERVIEW
- 2 SYSTEM CONFIGURATION
- 3 FUNCTION LISTS
- 4 INSTALLATION AND UNINSTALLATION
- 5 BASIC OPERATIONS
- 6 MANAGEMENT OF PROJECTS IN THE PERSONAL COMPUTER
- 7 MANAGEMENT OF DATA IN THE PLC CPU
- 8 DIAGNOSTICS
- 9 HELP
- INDEX
7 - 13 7 - 13
MELSOFT
7 MANAGEMENT OF DATA IN THE PLC CPU
7.1.6 Writing/reading device initial values
This section explains the operations for writing/reading device initial values to the
QCPU (Q mode) or QnACPU.
(1) Example of menu-driven operation
1) In the PC side window, choose the device initial value
file to be written.
("Device initial value" indicating the data type can also
be the target of write.)
2) Click the [Edit] - [Copy] menu.
(You may also right-click, choose the [Copy] menu,
press the
button, and click the Ctrl + C keys.)
3) Choose the memory in the PLC side window.
4) Click the [Edit] - [Paste] menu.
(You may also right-click, choose the [Paste] menu,
press the
button, and click the Ctrl + V keys.)
5) Click the Yes button in the write to PLC confirmation
dialog box.
(2) Example of drag and drop operation
Drag
Drop