Operating Manual
Table Of Contents
- SAFETY PRECAUTIONS
- REVISIONS
- SOFTWARE USER REGISTRATION
- INTRODUCTION
- CONTENTS
- About Manuals
- Generic Terms and Abbreviations Used in This Manual
- Product Makeup
- 1 OVERVIEW
- 2 SYSTEM CONFIGURATION
- 3 FUNCTION LISTS
- 4 INSTALLATION AND UNINSTALLATION
- 5 BASIC OPERATIONS
- 6 MANAGEMENT OF PROJECTS IN THE PERSONAL COMPUTER
- 7 MANAGEMENT OF DATA IN THE PLC CPU
- 8 DIAGNOSTICS
- 9 HELP
- INDEX
5 - 24 5 - 24
MELSOFT
5 BASIC OPERATIONS
(2) When mismatch occurs
When you changed the network configuration or connected to the station of a
different network, the network configuration information of the new connection
station does not match the already acquired network configuration information.
<When mismatch occurs at connection station check>
Click Get all stations or Connection station only to get the new network
configuration information.
POINT
Reading the saved network configuration information eliminates the need to get the
network configuration information when the connection station is changed.
Refer to Section 5.4.3 for saving/reading the network configuration information.