User's Manual

22 - 26
22. FA TRANSPARENT FUNCTION
22.4 System Configuration
22.4 System Configuration
22.4.1 GX Developer, GX Works2, GX LogViewer, MX Component, MX Sheet,
LCPU Logging Configuration Tool, Setting/Monitoring tool for C Controller
module
 When connecting the GOT and personal computer with serial or USB
*1 Applicable to the QCPU only
*2 GT10, LCPU Logging Configuration Tool are not applicable to the bus connection.
*3 GT11 and GT10 are not applicable to the Ethernet connection.
*4 The use of RS-232/USB conversion adaptor requires an installation of the dedicated communication driver onto personal
computer.
For details, refer to the following manual.
RS-232/USB Conversion adaptor User's Manual
*5 GX LogViewer, MX Component, MX Sheet, LCPU Logging Configuration Tool and Setting/Monitoring tool for C Controller module
are not supported.
*6 Not applicable to Setting/Monitoring tool for C Controller module.
GOT
PC
PLC
Varies according to
the connection type.
Connection cable
Connection type
dependant
Communication driver
PLC GOT Connection cable
Personal
computer
Number of
connectable
equipment
Connection type Model Interface
RS-232/USB
conversion adaptor
Cable model
Max.
distance
Software
For the system
configuration between the
GOT and PLC, refer to the
following.
BUS
CONNECTION
*2
DIRECT
CONNECTION TO CPU
*6
COMPUTER LINK
CONNECTION
*1*6
ETHERNET
CONNECTION
*3
GOT MULTI-DROP
CONNECTION
*5
RS-232 - GT01-C30R2-9S(3m)
3m
GX Developer
GX Works2
GX LogViewer
MX Component
MX Sheet
LCPU Logging
Configuration
Too l
Setting/
Monitoring tool
for C Controller
module
1 personal
computer
for 1 GOT
RS-232
- GT01-C30R2-6P(3m)
GT10-RS2TUSB-5S
*4
GT09-C30USB-5P(3m)
GT09-C20USB-5P(2m)
USB -
GT09-C30USB-5P(3m)
GT09-C20USB-5P(2m)
3m