User manual
2 Wiring and Connection
MITSUBISHI CNC
2 - 14
(4) How to insert the cable into 54928-0610, 54927-0510, and 54928-0310 (MOLEX) connector
How to connect a cable to the drive unit power supply connector is shown below.
(a) When using the supplied cable connection lever
[1] The drive unit is packed with the cable connection lever 54932-0000 (MOLEX).
[Unit: mm]
[2] Cable connection procedure
3.4
MXJ
غ
54932
20.6
10
4.9
6.5
(3)
4.7
7.7
(7.7)
(3.4)
(4.9)
1) Attach the cable connection lever to the housing.
(Detachable)
2) Push the cable connection lever in the direction of arrow.
3) Hold down the cable connection lever
and insert the cable in the direction of arrow.
4) Release the cable connection lever.
Cable connection lever