System information

65
6. Start up and shut down
6.1. Start-up process
When turning on (vP) command is published, it starts start-up process according to the contents saved
in the last memory. The priority is the order of the display memory, the input memory and input port.
If the memory number is set by start memory (Startmem command), set memory number is called at
start-up proccessing.
If auto power setting (Sautopow command) is set auto power on, the unit starts start-up process
automatically.
6.2. Shut-down process
When the unit shut down, following contents are memorized in the last memory.
Memorized last memory item
Last power Last power control state
Input port number Last selected input port number
Input memory number Last selected input memory number
Display memory number Last selected display memory number