System information

REV 4.0.
58
4.2.39. Ovcrp (V crop position)
Function: Vertical crop start position setting from frame memory of input signal of the input boards
(VC-B20KA / VC-B20KV / VC-B50KA / VC-B50KV). The execution result is saved in display
memory by Regdisp command execution. It executes after UP command receiving.
Effective inputs: S.ANALOG, S.DIGITAL, COMPOSITE, Y/C
Format: ID Ovcrp [ _ Pos ]
Vertical crop start position setting value from frame memory
0 – 1199 Vertical crop start position
Pos
Omitted Current setting value display
Response: ID Ovcrp _ pos
Current vertical crop start position setting value from frame memory
0 – 1199 Current vertical crop start position
?00 Invalid parameter
pos
?01 Execution failure
4.2.40. Ovcsize (V crop size)
Function: Vertical crop size position setting from frame memory of input signal of the input boards
(VC-B20KA / VC-B20KV / VC-B50KA / VC-B50KV). The execution result is saved in display
memory by Regdisp command execution. It executes after UP command receiving.
Effective inputs: S.ANALOG, S.DIGITAL, COMPOSITE, Y/C
Format: ID Ovcsize [ _ Size]
Vertical crop size setting value from frame memory
1 – 1200 Vertical crop size
Size
Omitted Current setting value display
Response: ID Ovcsize _ size
Current vertical crop size setting value from frame memory
1 – 1200 Current vertical crop size
?00 Invalid parameter
size
?01 Execution failure