System information

55
4.2.33. Ohcrp (H crop position)
Function: Horizontal crop start position setting from frame memory of input signal of the input
boards (VC-B20KA / VC-B20KV / VC-B50KA / VC-B50KV). The execution result is saved in
display memory by Regdisp command execution. It executes after UP command receiving.
Effective inputs: S.ANALOG, S.DIGITAL, COMPOSITE, Y/C
Format: ID Ohcrp [ _ Pos ]
Horizontal crop start position setting value from frame memory
0 – 1919 Horizontal crop start position
Pos
Omitted Current setting value display
Response: ID Ohcrp _ pos
Current horizontal crop start position setting value from frame memory
0 – 1919 Current horizontal crop start position
?00 Invalid parameter
pos
?01 Execution failure
4.2.34. Ohcsize (H crop size)
Function: Horizontal crop size setting from frame memory of input signal of the input boards (VC-
B20KA / VC-B20KV / VC-B50KA / VC-B50KV). The execution result is saved in display
memory by Regdisp command execution. It executes after UP command receiving.
Effective inputs: S.ANALOG, S.DIGITAL, COMPOSITE, Y/C
Format: ID Ohcsize [ _ Size ]
Horizontal crop size value from frame memory
8 – 1920 Horizontal crop size
Size
Omitted Current setting value display
Response: ID Ohcsize _ size
Current horizontal crop size value from frame memory
8 – 1920 Current horizontal crop size
?00 Invalid parameter
size
?01 Execution failure