System information

53
4.2.28. Itint (Tint)
Function: Tint setting in NTSC video input signal of the input board (VC-B20KV / VC-B50KV). The
execution result is saved in input memory by Reginp command execution.
Effective inputs: COMPOSITE, Y/C
Format: ID Itint [ _ Tint ]
Tint setting value
-8 – 8 Tint setting value
Tint
Omitted Current setting value display
Response: ID Itint _ tint
Current Tint setting value
-8 – 8 Current Tint setting value
?00 Invalid parameter
tint
?01 Execution failure
4.2.29. Ivcr (VCR Mode)
Function: VCR Mode setting in video input signal of the input board (VC-B20KV / VC-B50KV). The
execution result is saved in input memory by Reginp command execution.
Effective inputs: COMPOSITE, Y/C
Format: ID Ivcr [ _ Mode ]
VCR mode
0 VCR mode OFF
1 VCR mode ON
Mode
Omitted Current setting value display
Response: ID Ivcr _ mode
Current VCR mode
0 VCR mode OFF
1 VCR mode ON
?00 Invalid parameter
mode
?01 Execution failure
4.2.30. Ivsig (Video signal)
Function: Video signal format setting. The execution result is saved in input memory by Reginp
command execution.
Effective inputs: COMPOSITE, Y/C
Format: ID Ivsig [ _ Sel ]
Video input signal
0AUTO
1NTSC
2PAL
3 SECAM
4PAL-M
5PAL-N
6443NTSC
7PAL-60
Sel
Omitted Current setting status display
Response: ID Ivsig _ sel
Current selected video signal
0 – 7 selected video signal
?00 Invalid parameter
sel
?01 Execution failure