System information

51
4.2.23. Iname (Input Memory Name)
Function: Comment setting in input memory. The execution result is saved in input memory by
Reginp command execution.
Format: ID Iname MemNo [ _ ‘ Comment ’ ]
Input memory number
0 Comment setting (Only when comment is not omitted.)
MemNo
1 – 128 Input memory number to read comment
(Only when Comment is Omitted.)
Comment to set in input memory designated in MemNo
Character
strings
Comment *
Comment
Omitted Current setting value display
* The comment should be quoted by single quotation mark (27h: “ ’ ”). Available characters are
one-byte alphanumeric code, one-byte space and followings. Maximum number is 16
characters.
‘-’ (hyphen), ‘*’ (asterisk), ‘/’ (slash), ‘!’ (exclamation mark), ‘:’ (colon), ‘.’ (period), ‘?’ (question
mark), ‘(’, ‘)’ (parenthesis).
Response: ID Iname _ memno [ _ comment ]
Input memory number
0 The value when comment is not omitted
1 – 128 Input memory number
?00 Invalid parameter
memno
?01 Execution failure
Comment in input memory designated in memno
Character
strings
Comment
comment
Omitted It is omitted when memno is “?00” or “?01”.
4.2.24. Iscan (Scan Mode)
Function: Interlace setting to select scan mode; interlace (Static/Motion) or non-interlace, when
the input signal is analog or digital of the input board (VC-B20KA / VC-B50KA). The
execution result is saved in input memory by Reginp command execution.
Effective inputs: S.ANALOG, S.DIGITAL
Format: ID Iscan [ _ Mode ]
Scan mode (interlace/non interlace)
0 Non interlace
1 Interlace (Static mode)
2 Interlace (Motion mode)
Mode
Omitted Current setting status display
Response: ID Iscan _ mode
Current scan mode (interlace/non interlace)
0 Non interlace
1 Interlace (Static mode)
2 Interlace (Motion mode)
?00 Invalid parameter
mode
?01 Execution failure