System information

REV 4.0.
38
4.1.41. Startmem (Start Memory)
Function: Start memory setting. The execution result is saved in system memory by save
command execution.
Format: ID Startmem [ _ Mem ]
Start memory number direction
0 Using last memory when start-up
1 – 256 Display memory number when start-up
Mem
Omitted Current setting value display
Response: ID Startmem_ mem
Start memory number setting value
0 Using last memory when start-up
1 – 256 Display memory number when start-up
?00 Invalid parameter
Mem
?01 Execution failure
4.1.42. Svpos (V position)
Function: Offset value of vertical position setting. The pending commands are updated when this
command is executed. This command is invalid when display mode (Sdisp command) is set
without pixel superimposition. The execution result is saved in system memory by save
command execution.
Effective inputs: S.ANALOG, S.DIGITAL, COMPOSITE, Y/C
Format: ID Svpos [ _ Offset ]
Offset value of vertical position
-16 – 16 Offset value of vertical position
Offset
Omitted Current setting value display
Response: ID Shpos _ offset
Current offset value of vertical position
-16 – 16 Offset value of vertical position
?00 Invalid parameter
offset
?01 Execution failure
4.1.43. Svsize (V size)
Function: Offset value of vertical size setting. The pending commands are updated when this
command is executed. This command is invalid when display mode (Sdisp command) is set
without pixel superimposition. The execution result is saved in system memory by save
command execution.
Effective input:: S.ANALOG, S.DIGITAL, COMPOSITE, Y/C
Format: ID Svsize [ _ Offset ]
Offset value of vertical size
-16 – 16 Offset value of vertical size
Offset
Omitted Current setting value display
Response: ID Svsize _ offset
Current offset value of vertical size
-16 – 16 Offset value of vertical size
?00 Invalid parameter
offset
?01 Execution failure