System information

33
4.1.29. SetGrad (Set Gradation)
Function: Gradation value setting. This command is invalid when auto luminance control function
(SALC command) is set STOP or RUN. The execution result is saved in system memory by
save command execution.
Format: ID SetGrad _ Col _ Para [ _ Data ]
Adjusting color selecting
0White
1Red
2 Green
Col
3Blue
Adjusting parameter selecting
0Top
1Bottom
2 Left
3 Right
4 Top/Left
5 Top/Right
6 Bottom/Left
Para
7 Bottom/Right
Gradation adjusting value
-128 – 127 Gradation adjusting value
Data
Omitted Current setting value display
Response: ID SetGrad _ col [ _ para _ data ]
Adjusting color selecting
0White
1Red
2 Green
3Blue
?00 Invalid parameter
?01 Execution failure
col
?04 Adjustment was collapsed (Data value remains)
Adjusting parameter selecting
0 – 7 Parameter selecting (refer to Format)
para
Omitted It is omitted when para is “?00”, “?01” or “? _ 04”.
Current gradation adjusting value designated in para
-128 – 127 Gradation adjusting value
data
Omitted It is omitted when para is “?00”, “?01” or “? _ 04”.