System information

29
4.1.20. SCmode (Change Mode)
Function: Lamp change mode setting. The execution result is saved in system memory by save
command execution. This command is an exclusive command for lamp changer models.
Format: ID SCmode _ [ Mode]
Change mode
0OFF
1NORMAL
2LONG
Mode
Omitted Current setting value display
Response: ID SCmode _ mode
Current change mode
0OFF
1NORMAL
2LONG
?00 Invalid parameter
mode
?01 Execution failure
4.1.21. Scmtxset (Color Matrix set)
Function: Detail color matrix setting. The execution result is saved in system memory by save
command execution.
Format: ID Scmtxset _ Sel [ _ Data ]
Color matrix parameter
0 SATURATION
1RED
2 YELLOW
3 GREEN
4CYAN
5BLUE
Sel
6MAGENTA
Setting value
-5 – 5 Effective value range
in the case that Sel is 0 (SATURATION)
-20 – 20 Effective value range
in the case that Sel is NOT 0 (SATURATION)
Data
Omitted Current setting value display
Response: ID Scmtxset _ sel [ _ data ]
Color matrix parameter
0 – 6 Color matrix parameter selecting
?00 Invalid parameter
sel
?01 Execution failure
Current color matrix parameter designated in sel
-5 – 5 In the case that sel is 0 (SATURATION)
-20 – 20 In the case that sel is NOT 0 (SATURATION)
data
Omitted It is omitted when sel is “?00” or “?01”.