System information

REV 4.0.
28
4.1.18. Sblank (Blanking)
Function: White boost setting to process the color wheel blanking. The execution result is saved in
system memory by save command execution.
Format: ID Sblank [ _ Cont]
White boost setting
0OFF
1 – 10 White boost setting value
Cont
Omitted Current setting value display
Response: ID Sblank _ cont
Current white boost setting value
0OFF
1 – 10 White boost setting value
?00 Invalid parameter
cont
?01 Execution failure
4.1.19. Scablelength(Cable length)
Function: Setting of the signal cable length connected with input port “DIGITAL”.
When using long cable, set “Long”. If there is noise in image, set to eliminate the noise.
The execution result is saved in system memory by save command execution.
Effective models and inputs: DIGITAL, S-DIGITAL (VC-B50KA ) of model group A, B
Format: ID Scablelength _ Port [ _Length ]
Select of input port
0 DIGITAL
Port
1 S-DIGITAL (VC-B50KA )
Cable length setting
0NORMAL
1LONG
Length
Omitted Current setting value display
Response: ID Scablelength _ port [ _length ]
Selected input port
0 DIGITAL
1 S-DIGITAL(VC-B50KA )
?00 Invalid parameter
port
?01 Execution failure
Current cable length setting
0NORMAL
1LONG
length
Omitted It is omitted when port is “?00” or “?01”.