System information

ManualsBrandsMitsubishi Electric ManualsComputer equipmentXL50 series

REV 4.0.

4.1.14. SAwhite (System Auto White )

Function: Automatic white level adjusting of analog RGB signal in selected input port. The

execution result is saved in system memory by save command execution. Full-bit white

signal is required to input from the selected analog input port when this command is

executed. When Mode of Isig command is not set to 0, this command is not available. It may

take more than 700 msec till the display returns the result string after receiving a command.

Effective inputs: ANALOG, S.ANALOG

Format: ID SAwhite

Response: ID SAwhite [ _ err ]

Results status

Omitted Normal end (automatic adjusting is finished)

?00 Invalid parameter

err

?01 Execution failure

4.1.15. SautoDisp (Auto Display)

Function: Display of stand-by status, failure status, lamp blow-out status by LED indicator and

OSD warning indication (Lamp changer models only). The execution result is saved in

system memory by save command execution.

Format: ID SautoDisp _ Sel [ _ Mode ]

Kind of display

0Reserved

1 Warning indication by OSD (Lamp changer models only)

2 Display of stand-by status by LED.

3 Display of failure status by LED.

4 Display of lamp blow-out status by LED.

Sel

5Reserved

Setting of display

0 Display OFF

1 Sel=1: MESSAGE ☼

Sel=2,3,4: Display ON

2Sel=1: ☼

Omitted Current setting value display

Response: ID SSautoDisp _ sel [ _ mode]