System information

REV 4.0.
24
4.1.11. SAdark (ADV.Dark)
Function: Advanced dark setting to turn on/off the function to sense the room brightness and
adjust the image contrast. The execution result is saved in system memory by save
command execution.
Format: ID SAdark [ _ Sel ]
Advanced dark setting
0OFF
1ON
Sel
Omitted Current setting value display
Response: ID SAdark _ sel
Current advanced dark setting
0 – 1 Current advanced dark setting
?00 Invalid parameter
sel
?01 Execution failure
4.1.12. SAgain (Gain System)
Function: Gain (white level) value or clamp level setting of analog RGB signal in selected input
port. The execution result is saved in system memory by save command execution.
Effective inputs: ANALOG, S.ANALOG
Format: ID SAgain _ RGB [ _ Data ]
Adjusting color (R,G or B) selecting
0 Red gain fine adjusting
1 Green gain fine adjusting
2 Blue gain fine adjusting
3 Main contrast adjusting (S.ANALOG of model group C )
4 Red clamp level adjusting
5 Green clamp level adjusting
RGB
6 Blue clamp level adjusting
Gain(white level) adjusting value
0 – 127 Gain (white level) adjusting value ANALOG of model
group C
0 – 255 Gain (white level) adjusting value ANALOG of model
group A , B and
S.ANALOG of all
models
0 – 127 Clamp level adjusting value ANALOG
0 – 255 Clamp level adjusting value S.ANALOG
256 Factory setting
Data
Omitted Current setting value display