System information

23
4.1.9. SALCth (Threshold for auto luminance contorol)
Function: The luminance degradation value of the lamp that repeals luminance control setting.
The value that expressed a deteriorated part from initial luminance with % is set. When 40 is
set as a parameter, if the luminance of a lamp becomes 40% or less from initial luminance,
The display will separate from the group of luminance control. The execution result is saved
in system memory by save command execution.
Format: ID SALCth Mode [ _ Level]
Mode setting
Mode
0 Level setting that repeals luminance control
The luminance degradation value of the lamp that repeals luminance
control setting.
0 – 100 0% – 100%
Level
Omitted Current setting value display
Response: ID SALCth_ mode [ _ level]
Mode setting
0 Level setting that repeals luminance control
?00 Invalid parameter
mode
?01 Execution failure
The luminance degradation value of the lamp that repeals luminance
control setting.
0 – 100 0% – 100%
?00 Invalid parameter
?01 Execution failure
level
Omitted It is omitted when mode is ” ?00 ” or ” ?01 ”.
4.1.10. SAcolor (ADV. Color)
Function: Advanced color setting to turn on/off the processing of the colors out of the color gamut.
The execution result is saved in system memory by save command execution.
Format: ID SAcolor [ _ Sel ]
Advanced color setting
0OFF
1ON
Sel
Omitted Current setting value display
Response: ID SAcolor _ sel
Current advanced color setting
0 – 1 Current advanced color setting
?00 Invalid parameter
sel
?01 Execution failure