Hardware manual

Supported Models
PLC Ladder Monitor Operation Manual
1-3
1.2 Supported Models
 Supporting Connected Device
Maker Series Name CPU Link I/F
Communication
method
*1
*1 Communication mode changes according to type of link unit, cables used, etc. For details, see the relevant
driver manuals.
Device PLC Names
on GP-Pro EX
(Version)
*2
*2 The driver version can be checked by viewing [Peripheral List] in the [System Settings] window on the GP-
Pro EX, or [Driver Version] on [Offline Home] on the display.
Mitsubishi
Electric
Corporation
Q
series
High
Performance
Model
Q02CPU
Q02HCPU
Q06HCPU
Q12HCPU
Q25HCPU
CPU Direct
RS-232C
Mitsubishi Electric
Corporation Q series
CPU direct
(V1.16.10 or later)
QJ71E71
QJ71E71-B2
QJ71E71-B5
QJ71E71-100
Ethernet
(UDP/IP Connection)
Mitsubishi Electric
Corporation Q/QnA
Series Ethernet
(V1.12.04 or later)
Universal
Model
Q00UJCPU
Q00UCPU
Q01UCPU
Q02UCPU
Q03UDCPU
Q04UDHCPU
Q06UDHCPU
Q10UDHCPU
Q13UDHCPU
Q20UDHCPU
Q26UDHCPU
*3
*3 Supported instructions are GX-Developer Ver8.74C or earlier programming tool by Mitsubishi Electric
Corporation.
CPU Direct
RS-232C
Mitsubishi Electric
Corporation Q series
CPU direct
(V1.16.10 or later)
Q03UDECPU
Q04UDEHCPU
Q06UDEHCPU
Q10UDEHCPU
Q13UDEHCPU
Q20UDEHCPU
Q26UDEHCPU
*3
RS-232C port
on High
Performance
and Universal
Model
Q CPU
*4
*4 To communicate with QUDECPU, set Multi CPU System trough QCPU's RS-232C port.
(The supported QCPU are the CPU except for Q
UDECPU listed above.)
Communicate the display and the QCPU by CPU Direct.
RS-232C
Mitsubishi Electric
Corporation Q series
CPU direct
(V1.16.10 or later)
• If the driver for “Mitsubishi Electric Corporation Q/QnA Series Ethernet” is
not displayed, download the update module from the Pro-face support site
“Otasuke Pro!”.