Hardware manual

Menu Screen
PLC Ladder Monitor Operation Manual
3-7
Coil Search
This searches by output instruction.
This displays the ladder program with the specified output instruction at
the top of the screen.
Timer/Counter
Setting
This changes the timer/counter instruction setting values.
Enter the timer or counter address to set the value.
Device monitor
This displays the device monitor screen.
This closes the menu screen and returns to the previously displayed
screen.
• For the device monitor feature, see the following manual.
See: GP-Pro EX Reference Manual
• You cannot change the setup value when the indexed device, the link direct
device (J
\) or the intelligent function unit (U\G) is specified.
• To display the ladder program after changing the value, you need to read and
display the ladder again.
• You can change the value of a program located at the first number of the
settings screen that appears after executing “PC Parameter Scan Execution
Program”. Even if multiple programs exist on the CPU, the timer/counter
values of all the programs will not be changed.
Setting Description
The address
you entered
is displayed.
The value you
entered is
displayed.