Hardware manual

File Selection Screen
PLC Ladder Monitor Operation Manual
3-4
3.2 File Selection Screen
Names and Features on the File Selection screen
Setting Description
Name
This displays the name of the ladder file /comments file.
Size
This displays the size of the ladder file/comments file.
Date
This displays the date when you saved the ladder file/comments file.
Time
This displays the time you saved the ladder file/comments file.
Title
This displays the comments you made to the file.
Target CPU
This selects the PLC for the ladder program you wish to monitor.
Direct: This represents the directly connected CPU when using the CPU
direct driver.
1 to 4: These represent the unit number of each CPU when multiple CPUs
are configured.
Ladder Storage
This selects where to read the ladder program from [PG], [SRAM],
[FLASH], [RAM], [ROM], or [CACHE].
Comment Storage
This selects where to read the comment from [PG], [SRAM], [FLASH],
[RAM], [ROM], [CACHE], or [CF].
• Create the following folder on the CF Card to copy the project
comments file (∗.WCD) created with the GX-Developer programming
tool by Mitsubishi Electric Corporation. This saves PLC reading and
increases the reading speed.
Q Series CPU direct : “PLCLDMON\MIT_QCPU”
Q/QnA Series Ethernet : “PLCLDMON\MIT_QETH”
PLC Sel
This moves to the device/PLC selection screen.
Continued