Hardware manual

System Configuration
PLC Ladder Monitor Operation Manual
1-7
1.4 System Configuration
 Communication Cable Connection
The display and PLC are connected 1:1 with a communication cable.
 Ethernet Connection (UDP/IP Connection)
• 1-to-1 connection
• For details on connecting the display and PLC, see “Mitsubishi Electric
Corporation Q Series CPU Direct Driver” or “Mitsubishi Electric
Corporation Q/QnA Series Ethernet Driver” in “GP-Pro EX Device
Connection Manual”.
• To monitor the Q/QnA Series with Ethernet Connection, you need to input
the PC station number of the External Device that you want to monitor by
GP-Pro EX.
For the setting of PC station number, see “Mitsubishi Electric Corporation Q/
QnA Series Ethernet Driver” in “GP-Pro EX Device Connection Manual”.
7
1
4
0
8
2
5
.
9
3
6
Production System Parameter Settings
CLR
DEL
Cancel
E
N
T
-
Display
COM1
MELSEC Q series
RS232C port 8 round pins
Connection cable
Mitsubishi Q connection cable CA3-CBLQ-01 manufactured by Digital Electronics
Corporation (5m) or
RS-232C cable QC30R2 manufactured by Mitsubishi Electric Corporation (3m) or
RS-232C cable DQCABR2V-H for MELSEC-Q CPU connection manufactured by
Diatrend Corporation
HUB
Display
Connected
devices