Specifications

3 - 25
3.8.2 Setup confirmation test
The switch settings of the network module can be checked with this test.
The following three types of items can be checked:
1) Control station duplicate check
2) Station number duplicate check
3) Matching between the network set for the station to which GX Developer is
connected and the network number set with a network parameter of the host.
For example, in the following system, when the Setup confirmation test is conducted
by the GX Developer connected to station number 1, the monitor screen shown below
is displayed and the setting status of each station can be checked.
Station number 2 displays a duplicate control station setting error, and the duplicate
station number 3 displays a faulty station. Station numbers 1, 4 and 5 display the
network numbers and group numbers because there are no setting errors.
Station
No.1
(Parameter settings)
Control station
Network No.10
Duplicate error
Faulty station
GX Developer
Station
No.2
Station
No.3
Station
No.4
Station
No.5