Specifications

3 - 13
3.5.4 Writing of sequence program
Write the program for control to the CPU module.
1) Click
on the toolbar or the [Online]
[Write to PLC] menu.
2) Click Param+Prog
from the data read by
the "File selection" tab.
3) Click Execute
after selecting "Param+Prog".
4) The "Write to PLC" dialog box appears.
1) Click!
3) Click!
2) Click!
5) Click!
5) After the dialog box with the "Completed."
message appears when the write is
completed, click the OK
button.
REMARK
The demonstration machine used in this textbook has the PLC No.2 installed for the
multiple CPU configuration.
Read the following project beforehand and write to each PLC No.2.
Path name A: PLC No.2
Project name MAIN