Specifications

3 - 12
3.5.3 Specifying the connection target
Perform the connection target interface specification for the peripheral device and the
CPU module.
1) Click the [Online]
[Transfer setup] menu.
2) Check if the setting of the interfaces connected
by the peripheral device and the CPU module
matches.
3) If the interfaces do not match, double-click
[Serial USB] to open the [PC side I/F Serial
setting] screen.
1) Click!
3) Double-click!
2) Check the connection target!
5) Click!
4) Set the applicable interface.
5) Click OK
after setting.