Specifications

2 – 3
(3) Common parameters (Network range assignment)
Set the cyclic transmission ranges of LB, LW, LX and LY that can be sent by each
station in a single network. The common parameter settings are required only for
the control station and the remote master station. The data of the common
parameters are sent from the control station to the normal stations when the
network starts up.
(4) Network refresh parameters
Set the ranges to transfer the link devices (LB, LW, LX, LY) of the network link
module to the devices (X, Y, M, L, T, B, C, ST, D, W, R, ZR) of the CPU module for
using them in the sequence programs.