Specifications

App - 69
Error Code
(SD0) *
1
Error Contents and Cause Corrective Action
Applicable
CPU
9000 Annunciator F was turned ON
Read the individual information of the error using a
peripheral device, and check the program of its numerical
value (annunciator number).
9010 An error was detected by the CHK instruction.
Read the individual information of the error using a
peripheral device, and check the program of its numerical
value (error number).
9020
Storage of data onto ROM was completed normally in automatic
write to standard ROM.
(BOOT LED also flickers.)
Set the parameter valid drive to the standard ROM. Then,
switch power on again and perform boot operation from the
standard ROM.
QCPU
function
Ver. B or
later
10000 An error occurred in the CPU module other than the QCPU.
Check the details of the generated error by software
package of applicable CPU module.
QCPU
function
Ver. B or
later
*1: Characters in parentheses ( ) indicate the special register numbers where each information is being stored.