Specifications

App - 66
Error Code List (Continued)
LED Status
Error Code
(SD0) *
1
Error Messages
Common Information
(SD5 to 15)
Individual Information
(SD16 to 26)
RUN ERROR
Operating status of
CPU
Diagnostic Timing
5000
5001
WDT ERROR Time (Setting value)
Time (Actually measured
value)
Off Flicker Stop Always
5010
5011
PRG.TIME OVER Time (Setting value)
Time (Actually measured
value)
On On Continue Always
6000 PRB.VERIFYERR. *
5
File name ——— Off Flicker Stop Always
6010 MODE.VERIFY ERR. *
5
——— ——— On On Continue Always
6100
At power ON/
At reset/
At changing from
STOP to RUN
6101
TRK.MEMORY ERR. *
3
——— ——— On On Continue
At an END
instruction executed
6200 CONTROL EXE. *
4
Reason(s) for system
switching
——— On Off Continue Always
6210 CONTROL WAIT*
4
Reason(s) for system
switching
——— On Off Continue Always
6220
6221
6222
CANA’T EXE
CHANGE*
4
Reason(s) for system
switching
——— On On Continue
Always
Always
7000
At power ON/
At reset
7002
7003
MULTI CPU DOWN Unit/module No. ——— Off Flicker Stop
At power ON/
At reset
7010 MULTI EXE. ERROR Unit/module No. ——— Off Flicker Stop
At power ON/
At reset
7020 MULTI CPU ERROR Unit/module No. ——— On On Continue Always
*1: Characters in parentheses ( ) indicate the special register numbers where each information is being stored.
*2: The CPU module operation status when an error occurs can be set at the parameters. (LED display will change accordingly.)
*4: This can only be detected in the redundant system control system.
*5: This can only be detected in the redundant system standby system.