Specifications

App - 14
Link special register (SW) list (Continued)
Use permitted/prohibited
Control
station
Normal
station
Remote
master
station
Remote
I/O
station
Number Name Description
Optical Coaxial Optical Coaxial Optical Coaxial Optical Coaxial
SW000B
(11)
Logical channel
setting
(channel 4)
Sets the logical channel number for physical channel number 4. (Valid only for channels
on the receiving side)
0 : Logical channel number 4 (default)
1 to 64 : Other logical channel number is set.
SW000C
(12)
Logical channel
setting
(channel 5)
Sets the logical channel number for physical channel number 5. (Valid only for channels
on the receiving side)
0 : Logical channel number 5 (default)
1 to 64 : Other logical channel number is set.
SW000D
(13)
Logical channel
setting
(channel 6)
Sets the logical channel number for physical channel number 6. (Valid only for channels
on the receiving side)
0 : Logical channel number 6 (default)
1 to 64 : Other logical channel number is set.
SW000E
(14)
Logical channel
setting
(channel 7)
Sets the logical channel number for physical channel number 7. (Valid only for channels
on the receiving side)
0 : Logical channel number 7 (default)
1 to 64 : Other logical channel number is set.
SW000F
(15)
Logical channel
setting
(channel 8)
Sets the logical channel number for physical channel number 8. (Valid only for channels
on the receiving side)
0 : Logical channel number 8 (default)
1 to 64 : Other logical channel number is set.
SW001C
(28)
Number of retries
Indicates the change of the number of retires for the time of the issue of a request in the
send and receive instructions.
0 : 7 times (default)
1 to 7 : Number of retries
SW001D
(29)
Retry interval
Indicates the change of the retry interval for the time of the issue of a request in the send
and receive instructions.
0 : 100ms (default)
1 to 254 : Retry interval (unit: ms)
SW001E
(30)
Number of gates
Indicates the change of the number of gates for the time of the issue of a request in the
send and receive instructions.
0 : 7 times (default)
1 to 254 : Number of gates
SW0020
(32)
Module status
Stores the status of the network module.
0 : Normal
1 or more : Abnormal (Refer to Appendix 7.1 for error codes)
FF : Module error
ZNRD instruction
processing result
Indicates the processing result of the ZNRD instruction.
0 : Normal completion
1 or more : Abnormal completion (Refer to Appendix 7.1 for error codes)
SW0031
(49)
Send/receive
instruction (1)
processing result
Indicates the processing results of the SEND/RECV/READ/WRITE/REQ/RECVS/RRUN/
RSTOP/RTMRD/RTMWR/REMFR/REMTO instructions (when the physical channel 1 is
used).
0 : Normal completion
1 or more : Abnormal completion (Refer to Appendix 7.1 for error codes)
ZNWR instruction
processing result
Indicates the processing result of the ZNWR instruction.
0 : Normal completion
1 or more : Abnormal completion (Refer to Appendix 7.1 for error codes)
SW0033
(51)
Send/receive
instruction (2)
processing result
Indicates the processing results of the SEND/RECV/READ/WRITE/REQ/RECVS/RRUN/
RSTOP/RTMRD/RTMWR/REMFR/REMTO instructions (when the physical channel 2 is
used).
0 : Normal completion
1 or more : Abnormal completion (Refer to Appendix 7.1 for error codes)
SW0035
(53)
Send/receive
instruction (3)
processing result
Indicates the processing results of the SEND/RECV/READ/WRITE/REQ/RECVS/RRUN/
RSTOP/RTMRD/RTMWR/REMFR/REMTO instructions (when the physical channel 3 is
used).
0 : Normal completion
1 or more : Abnormal completion (Refer to Appendix 7.1 for error codes)
SW0037
(55)
Send/receive
instruction (4)
processing result
Indicates the processing results of the SEND/RECV/READ/WRITE/REQ/RECVS/RRUN/
RSTOP/RTMRD/RTMWR/REMFR/REMTO instructions (when the physical channel 4 is
used).
0 : Normal completion
1 or more : Abnormal completion (Refer to Appendix 7.1 for error codes)
SW0039
(57)
Send/receive
instruction (5)
processing result
Indicates the processing results of the SEND/RECV/READ/WRITE/REQ/RECVS/RRUN/
RSTOP/RTMRD/RTMWR/REMFR/REMTO instructions (when the physical channel 5 is
used).
0 : Normal completion
1 or more : Abnormal completion (Refer to Appendix 7.1 for error codes)