Specifications

5 - 13
5.4.1 Remote master station parameter settings
Set the network parameters to the PLC CPU of PLC 5 (remote master station).
As the setting of PLC 1 (10M
P1), PLC 2 (10NS2), PLC 3 (10NS3) and PLC 4 (10NS4) is
the PLC to PLC network, it is the same as Assignment I.
(1) Setting the number of module cards (network type), network setting
POINT
For the total number of (slave) stations, set the number of the remote I/O stations
other than the remote master station.
(2) Send range for each station (XY settings)
Select the "XY setting" for the "Switch screens" in the network range assignment
screen.
Select the "XY setting"