Service manual

(3) Monitor display

●Start: Press the MODE and HUMIDITY SELECTION buttons together 5 times when the power is off.

Press the POWER button within 2 seconds.

●Mode selection: Use the time switch to change through display modes (0 to 3).

(4) Demonstration program

●Start: Hold the MODE and HUMIDITY SELECTION buttons together and press the POWER button. The

demonstration starts after 3 seconds.

●Functions:

1 Blower locked at rank 3.

2 Compressor and valve stopped.

3 LCD and LED light at random.

●To end: Unplug

30% ~ 80% 1% increments

0°C ~ 39°C

0 ~ 6

0°C ~ 12°C

Humidity indication

Fan rank indication

Tube temperature

data indication

Room temperature

indication

Example: Room temperature 21°C

Display mode

21°C

(2) Deactivating 3-minute restart prevent lock

●Start: Press the MODE and HUMIDITY SELECTION buttons (Auto buttons for the E16S) together 3

times when the power is off. Press the POWER button within 2 seconds.

●Functions:

1 Deactivates 3-minute restart prevention lock

2 Activates compressor

3 Operating mode: Low Temp

4 Operates blower on HIGH

●To end: Turn power off. Valve functions for 3 seconds.

E16SX