User`s manual

1 - 12 1 - 12
MELSEC-Q
1 GENERAL SPECIFICATIONS OF INPUT AND OUTPUT MODULES AND
INSTRUCTIONS FOR SELECTING THEM
1.3.3 QI60 switch setting
Set the QI60 switches in I/O assignment of PLC Parameter.
Choose [Interrupt] in Type, choose [Switch setting], choose [HEX.] in Input format, and
set the interrupt processing conditions in Switch 1.
Choose Interrupt. Choose Switch setting.
Choose HEX.
Set the interrupt processing conditions
(leading edge/trailing edge) of CH1 to CH16.
Setting inhibited.
Set the interrupt processing condition with switch 1. The relationships between bits and inputs are as indicated
below.
XF
XE XD XC XB XA
X9 X8 X7 X6 X5 X4 X3 X2 X1 X0
b0b15 to
0: Leading edge, 1: Trailing edge