Specifications

15
■High-speed counter modules (ＱＤ６２-Ｈ０１, ＱＤ６２ - Ｈ０２ )
■DC input modules compatible with 6mA rated input current (ＱＸ４１-Ｓ２, ＱＸ８１-Ｓ２)
Use modules that have a high rated input current and are compatible with proximity sensor inputs.
■Temperature control module (Q64TCTTN, Q64TCRTN, Q64TCTTBWN, Q64TCRTBWN)
Temperature control module can be replaced without changing the existing temperature sensor.
Temperature sensor
Thermocouple
Platinum resistance thermometers
Thermocouple
(Heater disconnection detection function)
Platinum resistance thermometers
(Heater disconnection detection function)
AnS/QnAS Series
A1S64TCTT-S1
A1S62TCTT-S2
A1S64TCTRT
A1S64TCRT-S1
A1S62TCRT-S2
A1S64TCTRT
A1S64TCTTBW-S1
A1S62TCTTBW-S2
A1S64TCTRTBW
A1S64TCRTBW-S1
A1S62TCRTBW-S2
A1S64TCTRTBW
Q Series
Q64TCTTN
Q64TCRTN
Q64TCTTBWN
Q64TCRTBWN
Common type
Positive common
Negative common
AnS/QnAS Series
A1SX41
*1
A1SX41-S2
A1SX42
*2，*3
A1SX42-S2
*3
A1SX81
*1
A1SX81-S2
Q Series
QX41-S2
QX81-S2
*1： Use QX71 when 12VDC is selected.
*2： Use QX72 when 12VDC is selected.
*3： Use two QX41-S2s when using more than 32 points.
* QD62-H01/H02 have 16 occupied I/O points. To utilize the programs before module replacement, set the same start
numbers of I/O signal to the modules mounted to the right of the replaced high-speed counter module.
* The “limit switch output function” of A1SD61 can be substituted for the “coincidence output function” of
QD62-H01/H02.
Counting speed
50KPPS
10KPPS
AnS/QnAS Series
A1SD61
Q Series
QD62-H01
QD62-H02
Modules for Easy Replacement
A variety of modules are available
to facilitate replacement.
Modules can be replaced with no spec restrictions of the existing pulse generators (e.g. encoders etc.).
■Positioning module(QD73A1)
The positioning module realizes servomotor control with a high-resolution encoder, and is compatible with a 1 Mpps
maximum input pulse (x10 conventional module).
Replace the positioning module while maintaining existing external devices such as the servo amplifiers.
Positioning mode
A1SD70
QD73A1
Position control mode
Velocity/position control switchover mode
AnS/QnAS Series Q Series
16
MELSECNET/MINI-S3 I/O Module
Wiring Conversion Adapter
Replace NET/MINI-S3 systems with CC-Link while
reusing existing NET/MINI-S3 wiring.
■Wiring adapter terminal blocks eliminate the need to rewire.
(Example) Replacing AJ35TB2-16D with AJ65BTB2-16D using a wiring conversion adapter
A6ADP-2MC16D
MELSECNET/MINI-S3 input modules
(AJ35TB2-16D)
【Before replacement】 【After replacement】
Replace with the CC-Link I/O module
(AJ65BTB2-16D)
Remove the terminal block of the
CC-Link I/O module, and then install
the conversion adapter.
Rewire the CC-Link cables
and power cables only.
No modification is necessary
for I/O wiring since the
existing terminal block of the
MELSECNET/MINI-S3 I/O
module can be used.
Wiring
conversion
adapter
Discontinued model
Alternative module Conversion adapter
Output module
AJ35TB1-16D AJ65BTB1-16D
Wiring conversion adapter
for 26-point terminal block*
1
A6ADP-1MC16D
AJ35TB2-16D AJ65BTB2-16D
Wiring conversion adapter
for 34-point terminal block*
1
A6ADP-2MC16D
AJ35TB1-16T
Product name Model
Alternative model
AJ65BTB1-16T
Wiring conversion adapter
for 26-point terminal block*
1,
*
2
A6ADP-1MC16T
■Model list
*1: The overall size is increased
due to addition of the adapter
to the alternative module.
*2: Additional wiring to CTL+
(External power supply for
output) is required.
Input module
Model
Remarks (restrictions)