Specifications

12
13
For detailed specifications, precautions, and restrictions of the upgrade tool, please refer to the
brochure (NA C088E-116 published by Mitsubishi Electric Engineering Co., Ltd.) and user's manual.
For the upgrade tool, please contact your local Mitsubishi sales office or representative.
14
●Check mounting conditions before using the upgrade
tool, as the module width (34.5mm→27.4mm) and
wiring space is decreased.
●If cables interfere with the module, lift up the cables to
the front to avoid interference.
AnS/QnAS Series
module
Q Series
module
34.5
27.4
●If the cables still interfere, leave an empty slot between
modules to secure wiring space.
●Replace a terminal block cover with the one included
with a conversion adapter.
(Ex.) For Q38B
0 1 2 3 4 5 6 7
Input/output/analog
high-speed counter/
temperature module
OUT
USB
PULL
RS-232
MODE
RUN
ERR.
USER
BAT.
BOOT
PULL
POWER
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
If slots are insufficient,
add an extension base unit.
Conversion adapter
AnS/QnAS Series
terminal block
Existing cables of
AnS/QnAS Series
Front
Back
CPU module
Power supply
module
Lift up the cables
to the front to
avoid interference.
■Instructions
■Conversion Adapter DIN rail mounting bracket list
Mounting Brackets for Conversion Adapter with Fixture while mounting the MELSEC-Q Series base unit to DIN rail.
Installation with
DIN rail
DIN rail
*1: provides the installation
screw hole for mounting Fixture.
New
Conversion Adapter
DIN rail mounting
bracket
*1
Main base
/
Extension
A1S38B/A1S38HB
A1S68B
A1S35B
A1S65B
A1SJCPU
A1SJCPU-S3
A1SJHCPU
A1S33B
A1S55B
Main base
Extension
Main base
Extension
Main base
Extension
Q38B
Q68B
Q35B
Q65B
Q00JCPU
Q00UJCPU
Q33B
Q55B
ERNT-ASQDIN3868
ERNT-ASQDIN3355
ERNT-ASQDIN356500J
AnS/QnAS
Series model
Mounting Bracket
model
Q Series model
Note: A Q6DIN1, Q6DIN2 or Q6DIN3 Adapter for the DIN rail installation
(manufactured by Mitsubishi Electric Corporation) is also required while
mounting MELSEC-Q Series base unit with Conversion Adapter DIN rail
mounting bracket to DIN rail.
Conversion Adapter
(with Fixture)
Fixture
MELSEC-Q Series
module
MELSEC-Q Series
Base Unit
A2C Shape CC-Link Remote I/O Module
Replace A2CCPU and NET/MINI-S3 I/O modules with
CC-Link using existing NET/MINI-S3 wiring.
■The simple replacement process helps minimize the upgrade time.
The installation size is the same as that of A2C I/O modules; existing terminal block can be mounted
directly.
After replacing
the module,
mount the wired
terminal block.*
1
Remove the wired
terminal block from
the existing I/O
module.
AX41C
AX81C
AX40Y50C
AX40Y10C
AX80Y10C
AY13C
AY51C
AJ65DBTB1-32D
AJ65DBTB1-32T1
AJ65DBTB1-32DT1
AJ65DBTB1-32R
AJ65DBTB1-32DR
Terminal block type, 24 V DC input, 32 points,
positive/negative common shared
Terminal block type, 24 V DC input, 16 points;
0.5 A transistor output, 16 points, I/O composite module
Terminal block type, relay output, 32 points
Terminal block type, 24 V DC input, 16 points;
relay output, 16 points, I/O composite module
Terminal block type, 0.5 A transistor output, 32 points, sink
Discontinued model
Alternative model
Model
Outline
*1： The communication cables and power cables need to be rewired.
■Model list
Upgrade Tool/FA Goods
（manufactured by Mitsubishi Electric Engineering Co., Ltd.）