User`s manual

(8/58)
5) Remote command
(Not executable in sleep/standby mode. When the remote commands are sent while sleep/standby mode, the sleep/stand-by
mode is only canceled.)
Some remote control operations can be achieved by the remote command codes. The remote commands have no data codes.
Function Button’s name on remote
Character ASCII
+/VOLUME r06 72h 30h 36h
-/VOLUME r07 72h 30h 37h
AV MUTE ra6 72h 61h 36h
AUTO SETUP r09 72h 30h 39h
[Example] When executing the AUTO SETUP. (Figures and symbols enclosed in quotation marks are ASCII codes.):
Sending commands
from the PC, etc.
Status code
from the projector
Description
‘30’ ‘30’ ‘72’ ‘30’ ‘39’ ‘0D’
00r09
Command operating the same
as the MENU button
‘30’ ‘30’ ‘72’ ‘30’ ‘39’ ‘0D’
00r09
Command receipt confirmation
(Command echo back)
Note:
When you use a terminal application with typing the codes by hands, DO NOT type BS (Back Space) key or the other control keys. The behavior
may send unexpected codes in Sending command to the monitor. The communication may be rejected by the monitor, or the monitor may result
in unexpected operation in the worst case.