User`s manual

(3/58)

Communication Parameter

Set each communication parameters to the PC connected with each kind of cable.

A: RS-232C connection

(1)

RS-232C direct connection between PC and Display

Interface

RS-232C (

Asynchronous, Full-duplex)

Baud rate

9600bps

Data length

8bits

Parity

None

Stop bit

1 bit

Flow control None

Communication code

ASCII

Communication signals

TXD, RXD

B: LAN connection

(1) LAN connection between PC and Display

Interface

TCP/IP

DHCP client mode

Changeable (default = OFF: not using)

IP address

Changeable (default = 192.168.0.10: depends on model)

Subnet mask

Changeable (default = 255.255.255.0)

Default gateway

Changeable (default = 192.168.0.1: depends on model)

Port

3007/63007 (Both of those ports are available. Use 63007

only if you have no support of legacy products.)