Instruction manual

English-28

LAN cable

LAN

LAN hub

LAN

Monitor connection using LAN

As shown in the illustration below, you can connect this monitor and a computer in network through a LAN hub. Connect the monitor

and the LAN hub using a straight type LAN cable (commercially available).

How to connect

• Turn off the main power switch of the computer and this monitor. If you make a connection while the power is on, it causes a

failure of the devices.

• Connect the computer and the LAN hub using a straight type LAN cable (commercially available).

• Connect this monitor and the LAN hub using a straight type LAN cable (commercially available).

• When you connect two or more monitors, you can connect the monitor and the LAN hub using a straight type LAN cable

(commercially available) as described above.

NOTE:

• When you use a cross type LAN cable (commercially available), you can connect the monitor and the computer one-to-one

without using a LAN hub, however, the computer may not be supported. It is recommended to check the operation in advance.

• The image transfer function via the LAN isn’t supported. This monitor isn’t equipped with the host function for controlling other

devices.

P-7 Connecting LAN

Carry out as necessary

Computer

(LAN connection)

LAN hub

LCD monitor (rear)