LCD Display Monitor MODEL
Features ............................................................................................................................................................................................... English-2 Important Information ............................................................................................................................................................................ English-3 Declaration ....................................................................................
Features Industry-use LED backlight adopted LED backlight panel Power-on Delay Page 64 Commercial grade panel adopting the LED backlight. With the LED backlight, the monitor has achieved low power consumption and eliminated mercury. The slim monitor design allows installation in more various environments than the conventional monitors.
Canadian Department of Communications Compliance Statement DOC: This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to CAN/CSA C22.2 No. 60950-1. FCC Information 1. Use the attached specified cables with the MDT552S (A2129) color monitor so as not to interfere with radio and television reception.
Important Information (continued) WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET.
Declaration We hereby certify that the color monitor MDT552S (A2129) is in compliance with Council Directive 2006/95/EC: — EN 60950-1 Council Directive 2004/108/EC: — EN 55022 — EN 61000-3-2 — EN 61000-3-3 — EN 55024 and marked with Mitsubishi Electric Corporation 2-7-3, Marunouchi, Chiyoda-Ku Tokyo 100-8310, Japan Warning This is a Class A product. In a domestic environment this product may cause radio interference, in which case the user may be required to take adequate measures.
Safety Precautions, Maintenance & Recommended Use FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE LCD COLOR MONITOR: • • • • • • • • • • • • • • • • • • • DO NOT REMOVE MONITOR BACK COVER. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel. Do not spill any liquids into the cabinet or use your monitor near water.
Contents English Your LCD monitor (MDT552S) comes with the following: 54.
Parts Name and Functions Buttons, Switch, and Indicator Front Rear Control buttons ON OFF 1 Main Power Switch 3 POWER button ( Switches the main power on/off. Switches the power on/off. This button doesn’t work when the power indicator is off. Turn on the main power. (See page 32.
Parts Name and Functions (continued) Rear Left side OUT IN Main Power Switch IN IN OUT 1 AC IN (3-pin, with earth terminal) 9 LAN connector Connects with the supplied power cord. Connects with a LAN cord. Anti-theft lock slot You can insert a Kensington anti-theft lock key. 2 USB hub 10 VIDEO IN/OUT (S connector/BNC) USB upstream port (Standard B): 1 To be connected to an external computer.
Parts Name and Functions (continued) Wireless Remote Control 8 AUDIO INPUT buttons Selects the audio input according to the video input. NOTE: This button works only while any of HDMI1, HDMI2, OPTION (SDI BOX or OPS-compliant computer), or DISPLAYPORT video input is selected. See page 59. 9 PIP (Picture-In-Picture) buttons ON/OFF button: INPUT button: Switches the PIP or POP mode on/off. Selects video to be displayed in the sub picture. CHANGE button: Changes the main picture with the sub picture.
Parts Name and Functions (continued) Operating Range of the Wireless Remote Control Point the wireless remote control toward the LCD monitor’s remote control sensor during button operation. Use the wireless remote control within a distance of about 7 m from the front of the LCD monitor’s remote control sensor and at a horizontal and vertical angle of within 30° within a distance of about 3.5 m. Installing and removing the wireless remote control batteries The wireless remote control is powered by 1.
Preparation for use Flow of preparation P-1 Preparation for installation - Determine the installation location - Ventilation requirements for enclosure mounting - To avoid the monitor from falling Page 13 Carry out as necessary P-2 Installing the monitor Pages 14 to 17 - Installing and removing the stands (The stands are optionally available.
Preparation for installation Determine the installation location CAUTION: DO NOT ATTEMPT TO INSTALL THE LCD MONITOR BY YOURSELF. Installing your LCD monitor must be done by a qualified technician. Contact your dealer for more information. CAUTION: MOVING OR INSTALLING THE LCD MONITOR MUST BE DONE BY TWO OR MORE PEOPLE. Failure to follow this warning may result in injury if the LCD monitor falls. This LCD has a temperature sensor and cooling fan.
Installing the monitor Carry out as necessary Table 624 624 200 200 52 How to install the stands 1. Turn the monitor off. 2. Insert the option stands in the guide frames on both sides to the end. Secure the option stands on both sides firmly using the screws supplied with the option stands. 307.5 200 The stands are available as option. Refer to the user’s manual of the stand for more information. 200 Installing and removing the stands 411.
Installing the monitor (continued) Carry out as necessary 2. Slightly move and remove the stand guide frames. Preventing the handles from touching the wall By attaching the handles in the opposite orientation, you can reduce the depth of the monitor. NOTE: • Retain the stand guide frames and the screws that you have removed because they are necessary to install the monitor using the option stands. 1. Remove the screws that are holding the handles.
P-2 Installing the monitor (continued) Carry out as necessary Installation in the face-up position Installing in the portrait or face-up position Face-up The monitor can be installed in the portrait or face-up position. Ensure that the monitor is oriented as shown below. CAUTION: • The operating environmental condition (temperature) when the monitor is in the portrait or face-up position is 0˚C to 35˚C.
Installing the monitor (continued) Using the monitor without the bezel Carry out as necessary 3. Peel off the separators from the protective cover (b) assembled in step 1 and then attach the protective cover to the LCD panel. CAUTION: • MDT552S satisfies the UL requirements as long as it is used with the bezel attached. When using the monitor without the bezel, in which case the monitor doesn’t satisfy the UL requirements, cover the UL certification marking on the rear panel with the supplied label.
P-3 Installing the optional speakers Carry out as necessary How to install the optional speakers 1. Install the optional speakers on the monitor. Use the metal fittings and screws supplied with the optional speakers. Please refer to Quick Setup Guide of the optional speakers for the detailed installation procedure. 2. Insert the left speaker cable into the SPEAKER (S)(L) on the monitor, and insert the right speaker cable into the SPEAKER (S)(R).
Connection procedure Before making connections • First turn off the power of all the connected equipment before making connections. • Refer to the user manual of each piece of equipment. NOTE: Please use the audio cable without resistance when the audio output terminal of the audio device and PC is stereo mini-Jack. When the audio cable with resistance is used, the audio level may be affected or no sound could be heard.
P-4 Connection procedure (continued) Prevention of disconnection of HDMI cable For connecting an HDMI cable to the connector on the monitor, it is recommended to secure the cable using an accessory clamper to prevent accidental disconnection. 1. Connect an HDMI cable to the connector on the monitor. 2. Secure the HDMI cable using a clamper (accessory) and a band (accessory). Remove the screw from the monitor. Attach the clamper to the monitor using the screw you have removed in step .
P-4 Connection procedure (continued) Analog connection: (1) Connect a signal cable (mini D-SUB 15-pin – mini D-SUB 15-pin) (accessory) to the D-SUB/YPbPr IN connector. (2) Select [D-SUB] using the INPUT button on the monitor or the D-SUB button on the wireless remote control. At the moment of the selection, the audio is automatically switched to [ANALOG]. Audio connection: • Connect an audio cable (ø3.5-mm stereo mini) (commercially available) to the AUDIO ANALOG IN connector.
P-4 Connection procedure (continued) Connecting with a computer (digital connection) Digital connection: • Connection via the HDMI IN connector (1) Connect an HDMI cable (commercially available) to the HDMI1 IN or HDMI2 IN connector. (2) Select [HDMI1] or [HDMI2] according to the connected connector by pressing the INPUT button on the monitor or the HDMI1 or HDMI2 button on the wireless remote control.
P-4 Connection procedure (continued) This monitor can be connected to a video device equipped with component output such as a DVD player. Refer to the user’s manual of the connected device for details. (Cables shown in the figure below are commercially available.) • To connect a DVD player equipped with component output to the D-SUB/YPbPr IN connector on the monitor, use a signal cable (mini D-SUB 15-pin – BNC) and a BNC – RCA adaptor (commercially available).
P-4 Connection procedure (continued) Connecting a video device (composite video/S video device)/stereo amplifier This monitor can be connected to a composite video or S video device or a stereo amplifier. Refer to the user’s manual of the composite video or S video device or the stereo amplifier for details. (Cables shown in the figure below are commercially available.) • To connect a video device to the VIDEO IN connector (VIDEO IN or S-VIDEO IN) on the monitor, use a BNC cable or an S video cable.
Installing the expansion module Installation of the expansion module Carry out as necessary 3. Install the option slot cover (accessory) using the 5 screws (b) that you have removed in step 2. Install the expansion module to the option slot of this monitor following the precautions and procedures described in the manual supplied with the module.
P-5 Installing the expansion module (continued) Removal of the SDI BOX Hold the handle on the SDI BOX for removal. CAUTION: Use the handle to extract the SDI BOX only. Pulling on the SDI cable (BNC) or by other means may cause damage. Carry out as necessary 4. Insert an OPS-compliant computer (commercially available) in the option slot and secure it on the monitor using the 2 screws (b) that you have removed in step 2. Attach the handle using the 2 screws (a) that you have removed in step 2.
P-6 Connecting RS-232C Carry out as necessary To control this monitor from a computer via a communication, connect this monitor and the computer using an RS-232C cable (commercially available). How to connect • • • Turn off the main power switch of the computer and this monitor. If you make a connection while the power is on, it causes a failure of the devices. Connect the computer and this monitor using a reverse type RS-232C cable (commercially available).
P-7 Connecting LAN Carry out as necessary Monitor connection using LAN As shown in the illustration below, you can connect this monitor and a computer in network through a LAN hub. Connect the monitor and the LAN hub using a straight type LAN cable (commercially available). How to connect • • • • Turn off the main power switch of the computer and this monitor. If you make a connection while the power is on, it causes a failure of the devices.
P-8 Connecting a USB device Carry out as necessary The USB hub of this monitor is equipped with two switchable upstream ports. One is for connecting an external computer, and the other is for connecting an OPS-compliant computer internally. Only the selected upstream port is connected to the USB hub. Use the OSD screen function to select the appropriate upstream port. See pages 45 and 57. 1.
P-9 Connecting the power cord to the monitor Connecting the power source Before making connections • Check that the main power switch is off. • CAUTION: When an OPS-compliant computer is installed and the main power switch of the monitor is on, connecting the power source may cause the computer to power on, causing damage or breakdown of the operation system and the hard disc. The power outlet socket should be installed as near the equipment as possible and should be easily accessible.
How to Use U-1 Turning on all the connected devices U-2 Selecting the video input Page 34 U-3 Controlling the external devices Page 35 U-4 Selecting the OSD language Page 35 Pages 32 to 33 D-SUB only U-5 Auto-setup Page 36 U-6 Selecting the picture mode Page 37 U-7 Screen adjustment Page 37 U-8 Picture adjustment Page 38 Carry out as necessary U-9 Speaker setting Page 38 U-10 Volume, balance, and tone control Page 39 U-11 Schedule setting Pages 40 to 41 U-12 Remote contr
U-1 Turning on all the connected devices Turning on external devices 1. Turn on the connected devices such as the computer and DVD player. 3. When the power indicator glows red, press the POWER button on the monitor. The power indicator turns green. Turning on the monitor CAUTION: When an OPS-compliant computer is installed as an expansion module, the computer automatically turns on and starts as the monitor is turned on.
U-1 Turning on all the connected devices (continued) This function reduces the power consumption of the monitor when the keyboard or the mouse is not used for a fixed period even though the power of the monitor is on. While this function is working, the screen becomes dark and the power indicator glows green and red. This function is available only when a computer equipped with the VESA-approved DPM Power Management function is connected to the monitor.
U-2 Selecting the video input You can select the desired video input using the wireless remote control or the INPUT button on the monitor. Select using the INPUT buttons on the wireless remote control. You can select the desired video input by pressing the corresponding INPUT button on the wireless remote control. Selectable video inputs are [HDMI1], [HDMI2], [DVI-D], [D-SUB], [OPTION]*, [DISPLAYPORT], [YPbPr], [S-VIDEO], and [VIDEO].
U-3 Controlling the external devices English To control the connected external devices, display images on the monitor. DVD player, etc. Personal computer U-4 Selecting the OSD language Display the OSD menu by pressing the MENU button on the wireless remote control or the EXIT button on the rear of the monitor. Using LANGUAGE in the CONFIGURATION1 menu of the OSD screen function, you can select the OSD language. See page 53.
U-5 Auto-setup analog inputs only Press the AUTO SETUP button on the wireless remote control to directly display the AUTO SETUP menu of the OSD screen function. Alternatively, press the MENU button on the wireless remote control or the EXIT button on the rear of the monitor to display the OSD screen, and then display the AUTO SETUP menu by selecting AUTO SETUP in the CONFIGURATION1 menu.
U-6 Selecting the picture mode HIGHBRIGHT: STANDARD: sRGB: CINEMA: The brightness is maximized. Factory default setting. Suitable for color matching with sRGB-compliant devices. Suitable for viewing movies. NOTE: • “sRGB” can be selected for computer input (HDMI1*, HDMI2*, DVI-D, D-SUB, OPTION (OPS-compliant computer), and DISPLAYPORT). • “CINEMA” can be selected for video input (HDMI1*, HDMI2*, OPTION (SDI), YPbPr, VIDEO, and S-VIDEO). * U-7 Automatically selected depending on the input signal.
U-8 Picture adjustment Display the OSD menu by pressing the MENU button on the wireless remote control or the EXIT button on the rear of the monitor. Using the PICTURE menu of the OSD screen function, you can adjust the picture settings such as the brightness, contrast, and sharpness to obtain desired image quality. U-9 Speaker setting Carry out as necessary Select the built-in speakers or the external special stereo speakers (option) in the speaker setting in the OSD menu.
U-10 Volume, balance, and tone control Carry out as necessary English Volume control You can control the volume level using the VOL button on the wireless remote control. Balance and tone adjustment You can adjust the speaker balance, treble, and bass using the AUDIO menu of the OSD screen function. For adjustment, display the OSD menu by pressing the MENU button on the wireless remote control or the EXIT button on the rear of the monitor.
U-11 Schedule setting Carry out as necessary Display the OSD menu by pressing the MENU button on the wireless remote control or the EXIT button on the rear of the monitor. Using SCHEDULE in the CONFIGURATION2 menu of the OSD screen function, you can program power-on/off and input selection.
U-11 Schedule setting (continued) Carry out as necessary English How to set up schedule Check box Radio button Program number selection When the cursor is in any of the check boxes showing the program numbers 1 to 7 on the left side of the screen, press the UP ( or DOWN ( ) button to move the cursor up or down to select the program number you want to set. To enable the selected program number, press the SET button to place a checkmark in the check box. To disable it, clear the checkmark.
U-12 Remote control Carry out as necessary RS-232C Remote control When the monitor is connected directly to a computer using an RS-232C cable (commercially available), the following operations can be controlled via a communication. Select the communication interface (RS-232C) used for the serial communication function. (See page 54.) • • • • • Power ON or OFF Switching between input signals Volume control and mute Auto setup Check of the internal temperature of the monitor, etc.
Carry out as necessary 4) Operation commands The operation commands configure the basic operation settings of this LCD monitor. The commands may not work during signal switchover. The operation commands have no data codes.
U-12 Remote control (continued) Carry out as necessary 5) Read command The computer sends the command without datacode to the monitor. After receiving this command, the monitor returns the command with datacode including the current status to the computer. Example: When the computer asks the power status of the monitor, and the status of the monitor is powered-on.
U-13 Setting the USB hub Carry out as necessary • • • USB function may not work depending on the BIOS setting of the computer used, OS, and USB devices. In such a case, refer to the user’s manual of each device and contact the respective manufacturer. Up to 5 hubs can be cascaded in the hub function of this monitor. Carry out operation check in advance even if you connect a device pursuant to the USB standards. The USB hub function cannot control the monitor. 1. Select the computer to be used.
Configuration and basic operation of OSD screen Configuration of OSD screen This monitor is equipped with the OSD (On Screen Display) function for easy screen adjustment. The OSD function allows you to control the menus displayed on the screen for brightness setting and other settings. The OSD screen is configured as shown below. Main Menu Screen Main menu Icons other than the one you selected are grayed out.
Configuration and basic operation of OSD screen (continued) Check that the power indicator illuminates green and the monitor is powered on. Step Monitor button Wireless remote control OSD screen display 1 Press the MENU button to display the / OSD screen and then press the button to select the main menu. Press the EXIT button to display the / OSD screen and then press the button to select the main menu.
OSD screen functions PICTURE BRIGHTNESS MAGENTA YELLOW BLUE CONTRAST You can adjust the contrast. Adjust the contrast using the PLUS (+) or MINUS (-) button to obtain a desired result. NOTE: Brightness changes luminance of the backlight. Contrast changes signal levels, and therefore it is likely to lead to whiteness. This adjustment doesn’t work in the sRGB picture mode. RED You can adjust the brightness. Press the PLUS (+) button to increase the brightness.
OSD screen functions (continued) [CONTROL] PRIMARY: GAMMA SELECTION Select this setting to configure the monitor as Master when controlling multiple monitors collectively. SECONDARY: Select this setting to use the monitor alone or to configure the monitor as Slave when controlling multiple monitors collectively. You can select the gamma mode from NATIVE, S GAMMA, 2.2, 2.4, OPTION, and PROGRAMMABLE. PROGRAMMABLE can change the GAMMA characteristic curve via a computer.
OSD screen functions (continued) SCREEN H POSITION You can adjust the horizontal image position. Press the PLUS (+) button to move the image to the right. Press the MINUS (-) button to move the image to the left. V POSITION You can adjust the vertical image position. Press the PLUS (+) button to move the image up. Press the MINUS (-) button to move the image down. CLOCK * For the D-SUB inputs only. You can adjust the image size of the computer and eliminate blurred letters.
OSD screen functions (continued) English AUDIO BALANCE You can adjust the balance of the right and left volumes. Press the PLUS (+) button to decrease the left volume. Press the MINUS (-) button to decrease the right volume. TREBLE You can adjust the high frequency sound. Press the PLUS (+) button to increase the treble sound. Press the MINUS (-) button to decrease the treble sound. BASS You can adjust the low frequency sound. Press the PLUS (+) button to increase the bass sound.
OSD screen functions (continued) PIP (PICTURE IN PICTURE) NOTE: The PIP and POP functions don’t work in the CUSTOM and REAL picture size modes. Refer to “PIP, POP function” for details. (See page 61.) PIP MODE You can select the PIP mode from PIP, POP, SBS ASPECT, SBS FULL, and OFF using the PLUS (+) and MINUS (-) buttons. See page 61. PIP POP SBS ASPECT SBS FULL OFF * SBS: SIDE BY SIDE PIP SIZE You can select the size of the sub picture displayed in the PIP mode.
OSD screen functions (continued) English CONFIGURATION1 When you select a time period in the MOTION setting, the monitor enlarges the image and moves it horizontally and vertically. The portions of the image out of the display area aren’t visible. To make the entire image visible all the time, arrange it to fit within 90% of the screen area at the center. AUTO SETUP * For the D-SUB inputs only.
OSD screen functions (continued) CONFIGURATION2 SERIAL CONTROL Select the communication interface (RS-232C, OPS (OPScompliant computer), or LAN) for the serial communication function. For connection of the signal cable, see page 25 to 29. LAN SETTING You can set the communication parameters for the LAN network. DHCP CLIENT Select whether to use DHCP client or not. Select OFF when not using it, and select ON when using it. IP ADDRESS When DHCP CLIENT is OFF, set the IP address of the monitor.
OSD screen functions (continued) INFORMATION OSD You can enable and disable the information OSD display. The display time is selectable from 3 to 10 seconds. NOTE: The information OSD display shows a message when the input source is switched, the input signal state is changed, or the input signal has an error. OFF TIMER You can select the OFF TIMER mode. Select the time period to automatically turn off the power from 1 to 24 hours.
OSD screen functions (continued) ADVANCED OPTION The priority of the input signal is as follows: HDMI1 > YPbPr > VIDEO > S-VIDEO NOTE: You cannot select HDMI2, DVI-D, OPTION, and DISPLAYPORT. INPUT RESOLUTION * For the D-SUB inputs only. If the monitor fails to recognize the input signal resolution correctly, you can select a proper resolution manually.
OSD screen functions (continued) IR CONTROL You can lock the wireless remote control. and Select from the following 4 modes using the buttons and then determine the selected mode by pressing the SET button. NORMAL: All the remote control operations are enabled. PRIMARY: The first MDT552S monitor of those multiconnected via RS-232C is designated as PRIMARY. SECONDARY: MDT552S monitors other than the first one multi-connected via RS-232C are designated as SECONDARY.
Other functions Picture size OSD information HDMI1, HDMI2, DVI-D, D-SUB, OPTION (OPS-compliant computer), DISPLAYPORT FULL NORMAL CUSTOM REAL OPTION (SDI), YPbPr, VIDEO, S-VIDEO FULL NORMAL DYNAMIC CUSTOM NORMAL HDMI1, HDMI2, DVI-D, D-SUB, DISPLAYPORT DVI-D 1024 x 768 48kHz 60Hz AUDIO : ANALOG SIZE : FULL REAL NORMAL (Squeeze signal) NORMAL DYNAMIC Resolution Horizontal/vertical frequency Audio input mode Picture size mode OPTION (SDI) OPTION : SDI (3G) 1920 x 1080 67kHz 60Hz AUDIO : SDI SIZE : FU
Other functions (continued) You can select the audio input using the AUDIO INPUT button. Note that the selectable audio inputs vary depending on the currently selected video signal input.
Other functions (continued) Supplemental information of the auto brightness function To control multiple monitors collectively In such a case where the tiling function is used, you can control the auto brightness function by sharing the detection result of the brightness sensor of a certain monitor among the connected monitors. 1. Multi-connect the monitors using RS-232C cables (commercially available) as shown by the example below.
Other functions (continued) The following table shows the combinations of signal inputs with which the “PIP” and “POP” modes function. However, these modes do not function when the screen size is “CUSTOM” or “REAL”.
Other functions (continued) Remote control numbering function By connecting multiple MDT552S monitors using RS-232C cables, you can control any one monitor or all the monitors by one remote controller. 1. Assign arbitrary ID number to each of multi-connected MDT552S monitors using MONITOR ID. ID numbers 1 to 26 are selectable. It is recommended to assign sequential ID numbers from 1 and up. 2.
No picture • The signal cable should be securely connected to the display card/computer. • The display card should be securely seated in its slot. • The Main Power Switch and the computer power switch should be in the ON position. • Make sure that the correct mode has been selected on the display card or system being used. (Please consult the display card or system manual to change the graphics mode.) • Check the monitor and your display card with respect to the compatibility and recommended settings.
Specifications Model MDT552S Orientation Landscape/Portrait/Face-up 68 47 28 16.6 1248 1214 16.6 685 719 Dimension (Unit: mm) 56 Screen size (diagonal) LCD Module 54.6” (1388 mm) Panel Type VA Pixel Pitch 0.630 mm Resolution 1920 x 1080 pixels Color Approximately 1.06 billion colors Brightness (typ.) 450 cd/m2 Contrast ratio 4000 : 1 Viewing Angle (CR> =10) Up/Down 178°, Left/Right 178° Response time 6.5 ms (Gray to Gray) Viewable Size (H x V) 1209.6 mm x 680.4 mm / 47.6” x 26.
Pin Assignment 1) Analog RGB input: D-SUB Name Pin No Name 1 Video Signal Red 9 +5V (DDC) 2 Video Signal Green 10 SYNC-GND 3 Video Signal Blue 11 GND 4 GND 12 DDC-SDA 5 DDC-GND 13 H-SYNC 6 Red-GND 14 V-SYNC 7 Green-GND 15 DDC-SCL 8 Blue-GND Mini D-SUB 15-pin 1 5 6 10 11 15 2) Digital RGB input: HDMI Pin - Assignment of HDMI connector: 1 2 TMDS Data2+ 8 TMDS Data0 Shield HDMI 15 SCL TMDS Data2 Shield 9 TMDS Data0- 16 SDA 3 TMDS Data2- 10 TMDS Clock+ 17 DDC/C
Pin Assignment (continued) 5) S-VIDEO input (MINI DIN 4-pin) Pin No MINI DIN 4-pin Name 1 GND 2 GND 3 Y (Luminance) 4 C (Chroma) 4 3 2 1 6) RS-232C input/output Pin No 1 Name D-SUB 9-pin NC 2 RXD 3 TXD 4 NC 5 GND 6 NC 7 NC 8 NC 9 NC 1 5 6 9 7) LAN (Modular 8-pin) Pin# at RJ45 Signal #1 Orange/White stripe #2 Orange #3 Green/White stripe #4 Blue #5 Blue/White stripe #6 Green #7 Brown/White stripe #8 Brown Pair Modular 8-pin 1234 5678 English-66
MITSUBISHI Contact Information North America Europe Canada (Mitsubishi Electric Sales Canada Inc.) http://www.mitsubishielectric.ca Information Technologies Group, 4299 14th Avenue, Markham, Ontario L3R 0J2, Canada Sales Phone :+1-(905) 475-7728 Fax :+1-(905) 475-7958 E-mail :projectors@mitsubishielectric.ca Technical Phone :+1-(905) 475-7728 Fax :+1-(905) 475-7958 Customer Care E-mail :support@mitsubishielectric.ca France (Mitsubishi Electric Europe B.V.
