Technical information

55
MITSUBISHI ELECTRIC
MICRO CONTROLLERS
MICRO CONTROLLERS ///
Master and slave modules for PROFIBUS/DP
The M itsubishi PROFIBUS modules provide an
FX family CPU w ith an intellige nt PROFIBUS/DP
link for the implementation of decentralised
control tasks.
The FX3U-64DP-M is a PROFIBUS/DP master
module that allows the integration of a MELSEC
FX3U or FX3UC PLC system as a c lass 1 master in
a PROFIBUS/DP network.
The FX3U Profibus/DP master supplys compre
-
hensive data and alarm processing to the
Profibus/DP V1 standard. It is easily set up
with the GX Configurator-DP software.
The FX0N- 32NT-DP and FX3U-32DP are
PROFIBUS/DP slave modules that make it
possible to integrate a MELSEC FX1N/FX2N or
FX3U/FX3UC in an existing PROFIBUS/DP
network.*
It links the system to the master PLC in the
PROFIBUS/DP network for efficient and
trouble -free data exchange.
Specifications FX3U-64DP-M FX3U-32DP FX0N-32NT-DP
Module type Master Slave Slave
Transmission type Bus network
Transmission data
32 byte/slave (normalservicemode)
244 byte/slave (extended service mode)
Interface PROFIBUS/DP (with 9 pole D-SUB connector)
Max. number of master per configuration 1 — —
Repeaters 3 — —
Max. number of slaves 64 — —
Communications speed PROFIBUS standard
Communications distance m Max.1,200 (depends on communication speed)
Communication cable PROFIBUScable with 9-pin D-SUB connector
Power supply
5 V DC — — Max. 170mA (frombase unit)
24 V DC Max. 155 mA (from base unit) 145 mA (from base unit) 60 mA
Related I/O points 8 8 8
Dimensions(WxHxD) mm 43x90x87 43x90x87 43x90x87
Order information
Art. no. 166085 194214 62125
*Note: The FX3U-64DP-M and FX3U-32DP can only be used in combination with a FX3U/FX3UC series base unit.
0N
FX
-32NT-DP
POWER
BF
DIA
DC
RUN
Remote I/O Station FX2N-32DP-IF
The remote I/O station FX2N-32DP-IF forms an
extremely compact communication unit and
provides a connection of I/O modules with up
to 256 I/O points and/or up to 8 specialfunction
modules of the FX2N series as an alternative (ana-
log I/Os, network, communications and position-
ing modules).
It features an entire elec trical isolation of the
PROFIBUS/DP connec tor and of the
sensor/actuator circuits.
The FX2N-32DP-IF includes a 240 V power sup-
ply unit and a 24 V service voltage terminal, e.g.
for analog modules. The FX2N-32D P-IF-D is sup-
plied with 24 V DC.
PROFIBUS data such as the baud rate or I/O data
can be monitored directly with the program-
ming software or on the hand-held program-
ming unit FX-20P-E. This facilitates an easy error
diagnosis directly on the remote I/O station.
MITSUBISHI
COM
24 +
L
N
FX -32DP-IF
2N
POWER
RUN
STOP
RUN
BF
DIA
ON
OFF
64
32
16
8
4
2
1
Specifications FX2N-32DP-IF FX2N-32DP-IF-D
Power supply
100–240VAC
(+10 % / -15 %) 50/60 Hz
24 V DC
(+20 % / -30 %)
Power consumption 30 VA 14 W
Internal current consumption
5 V DC / max. 220 mA (from base unit),
24 V DC / 500 mA
5 V DC / max. 220 mA (from base unit)
Interface(connectors) 9-pinD-SUB for PROFIBUS /DP,8-pin Mini-DIN forPC orprogramming unit FX-20P-E
Communication
speed
1200 m kbps 9.6 / 19.2 / 45.45 / 93.75
1000 m kbps 187.5
400 m kbps 500
200 m kbps 1500
100 m kbps 3000 / 6000 / 12000
Communication distance m Max. 1200 (depends on communication speed)
Communication cable PROFIBUScable with 9-pin D-SUB connector
Max. number of controllable I/O points 256
Related I/O points 0
Dimensions(WxHxD) mm 75x98x87
Order information
Art. no. 103705 142763
3U
FX
-64DP-M
ERROR
FROM/TO
TOKEN
RUN
POWER
Automation Book_UK_2008.prn
Automation Book_UK_2008
Dienstag, 8. April 2008 18:20:48
Farbprofil: Deaktiviert
Komposit Standardbildschirm