Technical information

54
MITSUBISHI ELECTRIC
MICRO CONTROLLERS
/// MICRO CONTROLLERS
Positioning modules
The positioning modules FX2N-1PG-E and
FX2N-10PG are extremely efficient single-axis
positioningmodules for controlling either step
drives or servo drives (by external regulator) with a
pulsechain.Itisverysuitableforachievingaccu-
rate positioning in combination with the MELSEC
FX series.
The configuration and allocation of the position
data are carried out directly via the PLC program.
A very wide range of manual and automatic
functions are available to the user.
2N
-10PG
FX
START
POWER
DOG
ERROR
X0
PGO
X1
FP
øA
RP
øB
CLR
High speed counter and pulse train modules
These high speed modules provide additional
counting and pulse trainoutput features to the PL C.
The high speed counters allow 1- or 2-phase
pulses with counting speeds up to a maximum
of 50 kHz for the FX2N-1HC and 200 kHz for the
FX3U adapter (ADP) module. The FX3U pulse
train output module can provide pulse streams
up to 200 kH z for use in basic positioning appli
-
cations.
FX -1HC
2N
Specifications FX2N-1HC FX3U-4HSX-ADP * FX3U-2HSY-ADP *
Signal level 5, 12, 24 V DC / 7 mA 5 VDC Differential linedriver
Counter
inputs 2(1phase)or1(2phase) 4 —
outputs — — 2
Max. frequency
inputs kHz 50 100/200 —
outputs kHz — — 200
Counting range
(Up/down & ring counter)
16 bit 0–65535 — —
32 bit -2147483648 – [phone] — —
Output 5–24VDC;0.5A — lessthan25mA
Power supply
5 V DC 90 mA(from baseunit) 30 mA (from base unit) 30 mA (from base unit)
24 V DC — 30 mA (from base unit) 60 mA (from base unit)
Related I/O points 8 0 0
Dimensions (W x Hx D) mm 55 x 90 x 87 17.6 x 90 (106) x89.5 17.6 x 90 (106) x 89.5
Order information
Art. no. 65584 165274 165275
*for FX3U only
XREADY
Y READY
XERROR
Y ERROR
POWER
START
DOG
INT 0
INT 1
A
B
INT 0
INT 1
A
B
FX2
CU
-20SSC-H
SSCNET III module FX3U-20SSC-H
The SSCNE T module FX3U-20SSC-H can be used
in combination with a FX3U/FX3UC programma-
ble controller to achieve a cost effective solution
for high precision, h igh speed positioning. The
plug- and-play fiber optic S SCN E T cabling
reduces setup time and increase s control dis-
tance for positioning operations in a wide range
of applications.
Servo parameters and positioning information
for the FX3U-20SSC-H are easily set up with an
FX3U or FX3UC base unit and a p ersonal com-
puter. For parameter setting, monitoring and
testing the easy programming software
FX Configurator-FP is available.
Specifications FX3U-20SSC-H
Accessible axes 2 (independent or interpolation)via SSCNET III (servobus)
Output frequency 1 Hz to 50 MHz
Communications speed 50 Mbps
Starting time ms 1.6 (+1.7 SSCNET cycle time)
Max. to PLC connectable modules Up to 8 can be connected to the FX3U PLC
Power supply
5 V DC 100 mA
24 V DC —
Related I/O points 8
Dimensions(WxHxD) mm 55x90x87
Order information
Art. no. 206189
Note: TheFX3U-20SSC-H can only be used in combination with a FX3U/FX3UC series base unit. For applicableservo amplifiers and motors please refer to the
MR-J3 servo sectionof this catalogue.
Specifications FX2N-1PG-E FX2N-10PG
Accessible axes 1 1
Output frequency pulse/s 10 – 100 000 1 –1 000000
Signallevelfordigitalinputs 24VDC/40mA 5VDC/100mA;24VDC/70mA
Power supply
5 V DC 55 mA(from baseunit) 120mA (from base unit)
24 V DC — —
Related I/O points 8 8
Dimensions(WxHxD) mm 43x90x87 43x90x87
Order information
Art. no. 65583 140113
Automation Book_UK_2008.prn
Automation Book_UK_2008
Dienstag, 8. April 2008 18:20:38
Farbprofil: Deaktiviert
Komposit Standardbildschirm