Technical information

53
MITSUBISHI ELECTRIC
MICRO CONTROLLERS
MICRO CONTROLLERS ///
Analog temperature input modules
The analog input module for thermocouples
FX
2N-4AD-TC is used for processing tempera-
tures. It has 4 independent inputs for detecting
signals from thermocouples of types J and K.
The type of thermocouple can be chosen inde-
pendently for each point.
The analog input module for Pt100 inputs
FX
2N-4AD-PT permits the connec tion of four
Pt100 sensors to the FX2N or FX3U/FX3UC series
controller.
The te mp erature control module FX
2N-2LC is
equipped with two temperature input points
and two transistor (open collector) output
points.Itisusedtoreadtemperaturesignals
from thermocouples and Pt100 sensors, and
performs PID output control
Specifications FX2N-4AD-TC FX2N-4AD-PT FX2N-2LC
Analog inputs 4 (J or K type) 4 (Pt100 sensors) 2 points
Compensatedtemperaturerange °C -100–+600(Jtype)/-100 –+1200 (K type) -100 – +600 Thermocouple and Pt100 sensor
Digital outputs
-1000 – +6000 (J type) /
-1000 – +12000 (K type)
-1,000 – 6,000
(12 bit conversion)
2 transistor output points
Resolution 0.3 (J type) /0.4 (K type) 0.2 – 0.3°C 0.1 °C or 1 °C
Power supply
5 V DC 40 mA(from baseunit) 30 mA (from baseunit) 70 mA (from baseunit)
24VDC 60mA 50mA 55mA
Related I/O points 8 8 8
Dimensions(WxHxD) mm 55x90x87 55x90x87 55x90x87
Order information
Art. no. 65588 65587 129196
Note: TheFX2N-8AD canbe configured to accept standard analog inputs as well as selecte dtemperatureinputs such as K, T or J type thermocouples.
FX -4AD-TC
2N
A/D
Analog I/O adapters
The FX3U-4AD-ADP adapter module for analog
input is a special function adapter to add f our
analog input points to the FX3U/FX3UC PLC
system.
The FX3U-4DA-ADP adapter module for analog
output is a s pecial function adapter to add four
analog output points to the FX
3U/FX3UC PLC
system.
Specifications FX3U-4AD-ADP FX3U-4DA-ADP
Analog channels
inputs 4 —
outputs — 4
Analogrange 0–+10VDC,4–+20mA 0–+10VDC,4–+20mA
Resolution 2.5mV/10µA(12bit/11bit) 2.5mV/4µA(12bit)
Overall accuracy ±0.5 %* / ±1 % ±0.5 %* / ±1 %
Power supply
5 V DC 15 mA(from baseunit) 15 mA (from base unit)
24 V DC 40 mA 150 mA
Related I/O points 0 0
Dimensions (W x Hx D) mm 17.6 x 90 (106) x 89.5 17.6 x 90 (106) x 89.5
Order information
Art. no. 165241 165271
*Dependent on the ambient temperature and signal quality
Note: When connecting these adapter modules to a FX3U, the communications adapterFX3U-CNV-BD is required.
POWER
FX
3U
-4DA-ADP
24+
24-
V1+
COM4
I1+
COM1
V2+
I2+
COM2
V3+
I3+
COM3
V4+
I4+
Analog temperature input adapters
The analog input adapter for thermocouples
FX
3U-4AD-TC-ADP is used for processing tem-
peratures. It has 4 independent inputs for
detecting signals from thermocouples of
types J and K.
The FX3U-4AD-PNK-ADP analog input adapter
enables the connection of up to four
Pt1000/Ni1000 thermocouples.
The FX3U-4AD-PT-ADP and FX3U-4AD-PTW-ADP
analog input adapters enable the connection of
up to fourPt100 thermocouples to the PL Csystem.
All analog adapters can be used in combination
with the base units of the FX3U/FX3UC series
only.
24+
24-
•ú
L4-
•ú
J-type
L1+
L1-
L2+
L2-
L3+L3-
L4+
POWER
FX
3U
-4AD-PT-ADP
24+
24-
•ú
L4-
•ú
J-type
L1+
L1-
L2+
L2-
L3+L3-
L4+
POWER
FX
3U
-4AD-TC-ADP
Specifications FX3U-4AD-TC-ADP FX3U-4AD-PNK-ADP FX3U-4AD-PT-ADP FX3U-4AD-PTW-ADP
Analoginputs 4(JorKtype)
(Pt1000/Ni1000 sensors,
2/3 wire)
4 (Pt100 sensors) 4 (Pt100 sensors, 3-wire)
Compensated temperature
range
°C
-100 – +600 (J type) /
-100 – +1000 (K type)
-50 - +250 (Pt1000) /
-40 - +110 (Ni1000)
-50 – +250 -100 - +600
Digital outputs
-1000 – +6000 (J type) /
-1000 – +10000 (K type)
-500 - +2500 (Pt1000)/
-400 - +1100 (Ni1000)
-500 – [phone] - +6000
Resolution °C 0.3 (J type) / 0.4(K type ) 0.1 0.1 0.2 –0.3
Total accuracy ±0.5 % fullscale ±0.5 – 1.0 % (fullscale)* ±0.5 – 1.0 % (fullscale)* ±0.5 – 1.0 % (fullscale)*
Power supply
5 V DC 15 mA (from base unit) 15 mA (from base unit) 15 mA (from baseunit) 15 mA (from base unit)
24VDC 45mA 45mA 50mA 50mA
Related I/O points 0 0 0 0
Dimensions (W x Hx D) mm 17.6 x 90 (106) x 89.5 17.6 x 90 (106) x89.5 17.6 x 90(106) x 89.5 17.6 x 90 (106) x 89.5
Order information
Art. no. 165273 214172 165272 214173
*Dependent on the ambient temperature
Note: When connecting these adapter modules to a FX3U, the communications adapterFX3U-CNV-BD is required.
Automation Book_UK_2008.prn
Automation Book_UK_2008
Dienstag, 8. April 2008 18:20:29
Farbprofil: Deaktiviert
Komposit Standardbildschirm