Technical information

30
MITSUBISHI ELECTRIC
MODULAR PLCs
/// MODULAR PLCS
M
E
L
S
E
C
MITSUBISHI
Q
6
1
P
-
A
2
POWER
Base Units
Specifications Main Base Unit Extension Base Unit
Q33B-E Q35B-E Q38B-E Q38RB-E Q312B-E Q52B Q55B Q63B Q65B Q68B Q68RB Q612B
SlotsforI/Omodules 3588 1225358812
Slots for power supply modules 1 1 1 2 1 — — 1 1 1 2 1
Installation All base units provide an installation hole Ø 5 mm and M4 screws. All base units provide an installation hole Ø 5mm and M4 screws.
Dimensions (WxHxD) mm 1 89x98x44.1 245 x 98x 44.1 328 x 98 x 44.1 439 x98 x44.1 439x98x44.1 106x98x44.1 189 x 98 x 44.1 189 x98 x44.1 245 x98 x44.1 328 x 98 x 44.1 439 x 98 x 44.1 439 x 98 x 44.1
Order information Art. no.
136369 127586 127624 157573 129566 140376 140377 136370 129572 129578 157066 129579
Accessories Connection cables,adapter for DIN rail mounting
These units power all the modules on the
backplane. The choice is dependent on
the power consumption of the individual
modules (this is especially important
when using multiple CPUs).
앬
LED indicator shows operating status
앬
Use Q63P for applications powered by
24 V DC
앬
The power supply module Q62P can
be used world-wide with it's wide
input range from 100 to 240 V AC at
50/60 Hz
Power Supply Modules
Specifications Q61P-A1 Q61P-A2 Q62P Q63P Q63RP Q64P Q64RP
Input voltage
(+10 %, -15 %) V AC 100 –120 200 – 240 100 – 240 — — 100 – 240 100 – 240
(+30%,-35%)VDC———2424——
Inputfrequency Hz 50/60(±5%) 50/60(±5%) 50/60(±5%) — — 50/60(±5%) 50/60(±5%)
Inrush current 20 A within 8 ms 20 A within 8ms 20A within 8 ms 81 A within1 ms 150 A within 1 ms 20 A within1 ms 20 A within1 ms
Max.input apparent power 105 VA 105 VA 105 VA 45 W 65 W 160 VA 160 VA
Rated output current
5VDCA66368.58.58.5
24VDC±10%A——0.6————
Overcurrent protection
5VDC A ³ 6.6 ³ 6.6 ³3.3 ³ 5.5 ³5.5 ³ 14.4 ³ 14.4
24 V DC A — — ³ 0.66————
Overvoltage protection 5 V DC V 5.5 – 6.5 5.5 – 6.5 5.5 – 6.5 5.5 – 6.5 5.5 – 6.5 5.5 – 6.5 5.5– 6.5
Efficiency ³ 70 % ³ 70 % ³ 65 % ³ 70% ³ 65 % ³ 70 % ³65 %
Insulation withstand voltage
between primary and 5 V DC 2830 V AC, 1 min. 2830 V AC, 1 min. 2830 V AC, 1 min. 500 V AC, 1 min. 500 V AC, 1 min. 2830 V AC, 1 min. 2830 V AC, 1 min.
betweenprimaryand24VDC——2830VAC,1min.————
Max.compensation time at power failure ms 20 20 20 10 10 20 20
Dimensions (WxHxD) mm 55.2 x 98 x 90 55.2 x 98 x 90 55.2 x 98 x 90 55.2 x 98 x90 83 x 98 x 115 55.2x98x1 15 83 x 98 x 115
Order information
A rt.no. 129564 127593 140379 136371 166091 140718 157065
BA
MOD
SERIAL 0100017-A
SE UNIT
EL Q38B
0205020E
Q38B(N)
POWER
I/07
I/06
I/05
I/04
I/03
E.S.D
I/02
I/01
I/00
CPU
BA
MOD
SERIAL
0100017-A
SE UNIT
EL Q38B
0205020E
Q38B(N)
POWER
I/06
I/05
I/04
I/03
E.S.D
I/02
I/01
I/00
CPU
POWER
Main base units
The main base unit is used for mounting
and connecting CPUs, power supply unit,
input modules, output modules and spe
-
cial function modules.
앬
The modules are automatically
addressed
앬
The units are mounted by means of
screws or on a profiled rail with an
integrated adapter
Extension base units
The extension base units are connected to
themainbase unit by means of
pre-assembled bus cables.
앬
Q6*B extension units provide a slot for
their own power supply module
앬
A total of max.7 extension units can be
connected to a main base unit with up
to 64 I/O modules for a single system
앬
The maximum distance from the first
to the last base unit is 13.2 m
An ex tension base unit with a power sup
-
ply module must be used in the follow
-
ing cases:
앬
If the power consumption of the
inserted modules exceeds the
capacity of the power supply module
on the base unit
앬
If the voltage drops below 4.75 V
between the base unit and the
extension unit
Automation Book_UK_2008.prn
Automation Book_UK_2008
Dienstag, 8. April 2008 18:17:51
Farbprofil: Deaktiviert
Komposit Standardbildschirm