Technical information

23
MITSUBISHI ELECTRIC
NETWORKS
NETWORKS ///
DeviceNet
DeviceNet is another widely accepted open
network type with a large variety of third party
products. This network type is particularly
popular in North America.
DeviceNet is based on a producer/consumer
operation where peer-to-peer or master/slave
configuration are possible. DeviceNet is based
on C AN (Controller Area Network) serial bus
system. DeviceNet is a cost-effective solution
for network integration of low level terminal
equipment.
앬
Widely supported by many manufacturers
앬
Up to 500 kbps transmission speed
앬
Easy set-up with GX Configurator DN for
QSeries
앬
Wide range of Mitsubishi DeviceNet
products
앬
Master and slave available with Q and AnS
Series
Master
Slave
Model type Series Module Description
Art. no.
Master
Q series QJ71DN91 DeviceNet interface master/slave module 136390
AnS/QnAS A1SJ71DN91 DeviceNet master/slave module,for Ans and QnAS PLC's 124373
Intelligent Slave
FX FX2N-64DNET DeviceNet interface (slave) 131708
Inverter
FR-A5ND DeviceNet interface for A500 andF500 inverters 68043
FR-E5ND DeviceNet interface for E500inverters 104557
FR-A7ND DeviceNet interface for A700 and F700 inverters 158525
AS-Interface
Master
Slave
Model type Series Module Description
Art. no.
Master
Q series QJ71AS92 AS-i interface module,version 2.11,dual network master 143531
AnS A1SJ71AS92 AS-i master module for AnS (Double network master) 129936
FX FX2N-32ASI-M AS-i master 103314
Intelligent Slave Alpha AL2-ASI-BD AS-i interface board for use with AL2-14M or AL2-24Ms 142525
TheActuatorSensorInterface(AS-Interface)is
the international standard for the lowest field
bus level. The network suits versatile demands,
as it’s very flexible and easy to install. It is usu-
ally use d to control s en sors, ac t uators, I/O units
and gateways. The AS -Interface network has its
own distinctive y ellow cable which acts as both
a communication line and a power supply for
connecting devices. By using special coupling
bridges, any slave station on the network can
be moved and placed at a new location without
having to completely rewire or rebuild the net -
work.
앬
FX series supports up to 31 stations/nodes
per network
앬
QandAnSseriessupports2networks/
62 stations with a single module
앬
Easy to configure and swap modules
앬
Self healing cable needs no tools for
installation or system changes
Automation Book_UK_2008.prn
Automation Book_UK_2008
Dienstag, 8. April 2008 18:16:59
Farbprofil: Deaktiviert
Komposit Standardbildschirm