Technical information

21
MITSUBISHI ELECTRIC
NETWORKS
NETWORKS ///
Specifications ST1X2-DE1 ST1X4-DE1 ST1X16-DE1 ST1X1616-DE1-S1
Module type DCinput module, 2 inputs DC input module, 4 inputs DC input module, 16 inputs DCinput module, 32 inputs
OccupiedI/Opoints 2/2 4/4 16/16 16/16
Occupiedslicenumber1188
Isolation method Photo coupler Photo coupler Photo coupler Photo coupler
Rated input voltage V DC 24 (+20/-15%, ripple ratio within 5%) 24 (+20/-15%, ripple ratio within 5%) 24 (+20/-15%, ripple ratio within 5%) 24 (+20/-15%, rippleratio within 5%)
RatedinputcurrentmA4445
Inputs simultaneous ON 100% 100% 100% 100%
Input resistance kW 5.6 5.6 5.6 4.7
Response time
OFF 씮 ON ms 0.5/ 1.5or less(default: 1.5)
ON 씮 OFF ms 0.5 / 1.5 or less (default:1.5)
Internal current consumption (5V DC) mA 85 95 120 200
Dimensions (W x Hx D) mm 12.6 x 55.4 x 74.1 12.6x 55.4x 74.1 100.8 x 55.4 x 74.1 100.8 x 55.4 x 74.1
Applicablebase
module
spring clamp type ST1B-S4X2, art. no. 152911 ST1B-S6X4, art. no. 152912 ST1B-S4X16, art. no. 152913 ST1B-S6X32, art. no.169313
screw clamp type ST1B-E4X2,art. no. 152921 ST1B-E6X4, art. no. 152922 ST1B-E4X16, art. no. 152923 ST1B-E6X32, art. no. 169314
Connectioncable type 3-wire 24V DC(with shield) 3-wire 24 VDC 3-wire 24 V DC (with shield) 3-wire 24 V DC (with shield)
Order information
Art. no. 152964 152965 152966 169309
Digital input modules
The digital input modules of the ST
series direc tly connect field devices
(contac t s, limit switch es, se ns ors, etc. )
on to a PROFIBUS/DP ST series slave
node.
Digital output modules
The digital output modules of the ST
series connec t directly to field devices
(e.g. contactors, valves, lights) and
PROFIBUS/DP master module.
The TPE3 models provide advanced pro-
tection functions e.g. for thermal and
short circuit failures.
The electronic modules are fitted in a
base module, which can b e installed on
a standard DIN rail. Each module can be
replaced without having to turn O FF the
power ("Hot Swap"), without rewiring
and without using any tool.
Special features:
앬
DIN rail mounting
앬
LEDs for RUN and ERROR on the mod
-
ules and also on the basic module
앬
Connection to the basic module
(head station) via integrated
backplanebusinthebasemodules
앬
Two selectable types of connecting
terminals base modules:
쐍
spring clamp type terminals
쐍
screw clamp type terminals
Specifications ST1Y2-TE2 ST1Y16-TE2 ST1Y16-TE8 ST1Y2-TPE3 ST1Y16-TPE3 ST1Y2-R2
Module type 2transistor outputs 16 transistor outputs 2 transistor outputs 2 transistor outputs 16 transistor outputs Relayoutput
OccupiedI/Opoints 2/2 16/16 2/2 2/2 16/16 2/2
Occupiedslicenumber 181181
Isolation method Photo coupler Photo coupler Photo coupler Photo coupler Photo coupler Relay
Rated load voltage 24 V DC (+20/-15%) 24 V DC (+20/-15%) 24 V DC (+20/-15%) 24 V DC (+20/-15%) 24 V DC (+20/-15%)
24 V DC (+20/-15%); 240 V
AC
Max. load current A 0.5/point;1.0/common 0.5/point; 4.0/common 2.0/point; 4.0/common 1.0/point; 2.0/common 1.0/point; 4.0/common
2.0 (cos f=1)/point;
4.0/common
Nax.swithingload —————264VAC/125VDC
Max. inrush current A 4.0 (10 ms or less) 4.0 (10 ms or less) 4.0 (10 ms orless) 2.0 (10 ms or less) 4.0 (10 ms or less) —
Leakage current OFF mA 0.1 or less 0.1 or less 0.1 or less 0.3 or less 0.3 orless —
Max. voltage drop at ON
0.2 V DC (TYP) 0.5 A,
0.3 V DC (max.) 0.5 A
0.2 V DC (TYP) 0.5 A,
0.3 V DC (max.) 0.5 A
0.2 V DC (TYP) 2.0 A,
0.3 V DC (max.) 2.0 A
0.15 V DC (TYP) 1.0 A,
0.2VDC(max.)1.0A
0.15 V DC (TYP) 1.0 A,
0.2 V DC (max.) 1.0 A
—
Response time
OFF 씮 ON ms max. 1.0 max. 1.0 max. 1.0 max. 0.5 max. 0.5 max. 10
ON 씮 OFF ms
max. 1.0
(rated load, resistiveload)
max. 1.0
(rated load, resistiveload)
max. 1.0
(rated load, resistiveload)
max. 1.5
(rated load, resistiveload)
max. 1.5
(rated load, resistiveload)
max. 12
Protection functions — — —
Thermal protection, short circuit protection(thermal and
short circuit protection are activated in incrementsof1points.
When the output section protection function is working,
LED indicates it and signal isoutput to head module
(automatic reset).
—
Internal current consumption (5V DC) mA 90 150 95 95 160 90
Dimensions (W x Hx D) mm 12.6 x 55.4 x 74.1 100.8 x 55.4 x 74.1 12.6 x55.4 x74.1 12.6 x 55.4 x 74.1 12.6 x 55.4 x 74.1 12.6 x 55.4 x 74.1
Applicablebase
module
spring clamp type ST1B-S3Y2, art. no. 152914 ST1B-S3Y16, art. no. 152915 ST1B-S3Y16, art. no. 152915 ST1B-S3Y2, art.no. 152914 ST1B-S3Y16, art. no. 152915 ST1B-S4IR2, art. no. 152916
screw clamp type ST1B-E3Y2,art. no. 152924 ST1B-E3Y16, art. no. 152925 ST1B-E3Y16, art. no. 152925 ST1B-E3Y2, art. no. 152924 ST1B-E3Y16, art. no.152925 ST1B-E4IR2, art. no. 152927
Connectioncable type 2-wire 24V DCwith shield 2-wire 24 V DC with shield 2-wire 24V DCwith shield 2-wire 24 V DC with shield 2-wire 24 V DC with shield 2 wires (internal connected)
Order information
Art. no. 152967 152968 169408 152969 152970 152971
11
12
32
52
72
13
33
53
73
22
42
62
82
23
43
63
83
92
112
132
152
93
113
133
153
102
122
142
162
103
123
143
163
161
131
151
ST1Y16
-TE2
RUN
ERR.
21
11
41
31
61
51
81
71
101
91
121
141
111
11
12
13
22
23
ST1Y2
-TE2
RUN
ERR.
21
11
Automation Book_UK_2008.prn
Automation Book_UK_2008
Dienstag, 8. April 2008 18:16:46
Farbprofil: Deaktiviert
Komposit Standardbildschirm