Technical information

120
MITSUBISHI ELECTRIC
POWER SUPPLIES
/// POWER SUPPLIES
The ALPHA POWERs are convenient p ower
supplies for the 24 V units and other ex ternal
devices. They are applicable for wall or DIN rail
mounting and their dimensions are matched to
those of the Alpha family.
Up to 5 Alpha Power units can be installed
together for redundant mode operation or
connected in parallel for more power.
The units have an integrated thermal overload
protection circuit and a POWER LED. The out
-
put voltage is adjustable.
ALPHA POWER
Output DC
24V 1.75 A
Input AC
24V 1.75 A
Specifications ALPHA POWER 24-0.75 ALPHA POWER 24-1.75 ALPHA POWER 24-2.5
Application Power supply for the 24 V ALPHA base units and external devices
Nominal input voltage 100–240 V AC (45 – 65 Hz)
Output voltage 24 V DC (+/-1 %)
Max. output current 0.75 A 1.75 A 2.5 A
Protection IP20
Dimensions(WxHxD) mm 36x90x61 54x90x61 72x90x61
Order information
Art. no. 209029 209030 209031
The power supply modules FX3U-1PSU-5V
and FX3UC-1PS -5V are used to reinforce the
build-in 5 V DC and 24 V DC power supply of a
FX3U/FX3UC main unit. They do not occupy
any I/O points and deliver up to 1 A more cur-
rent for the 5 V system bus (for special function
modules).
Two FX3U-1PSU-5V units can be installed in
parallel for more power.
Note: The FX3U-1PSU -5V can't be used wit h a 24 V
base unit!
When connecting an input extension module (e.g.
FX2N-8ER-ES/UL,FX2N-8ER) to the FX3U -1PSU -5V,
supply the power for it from the 24 V DC ser vice
power supply of the connected main unit or pow-
ered extension unit on the upstream side.
Specifications FX3U-1PSU-5V FX3UC-1PS-5V
Application Power supply for the FX3Usystem bus Power supply for the FX3UC system bus
Nominal input voltage 100–240 V AC (50/60 Hz) 24 V DC (+20 %/-15 %)
Outputvoltage 5VDC/24VDC 5VDC
Max. output current
5VDC 1Aat40°C;0.8Aat55°C 1A
24 V DC 0.3 A at 40 °C; 0.2 A at 55 °C —
Dimensions(WxHxD) mm 55x90x87 24x90x74
Order information
Art. no. 169507 210086
FX -1PSU-5V
3U
Power Supply Modules
Theprimaryswitched-modepowersupply
units PSU are especially applicable for universal
usage in batch mechanical engineering. The
wide range input and the UL, cUL certifications
allow a worldwide application. The 3-phase
units supply the full permanent output power
at breakdown of one phase
Thepowersupplyunitscanbeinstalledinpar-
allel for more power or for redundant mode
operation.
The units dispose of an adjustable output volt-
age, a thermal overload protection circuit and a
POWER LED.
Specifications PSU 25 PSU 50 PSU 100 PSU 200 PSU 200-3 PSU 400-3
Application Power supply forall peripheral devices
Nominal input voltage 100–240 V AC (45 – 65 Hz) 380 – 400 V AC
Output voltage 24 V DC
Max.outputcurrent 2.5A 5A 10A 20A 20A 40A
Protection IP20
Dimensions (W x Hx D) mm 32x130x115 40x130x115 60x130x152.5 115x130x152.5 115x130x152.5 139x130x190
Order information
Art. no. 206147 206148 206149 208850 208851 208852
Accessories (PSU 100 or larger) Wall mounting apter PSU-UWA, art. no.: 208853
INDUST
RIAL
CONTROL
EQUIPMENT
43KA
EN 61
00
0-6
-2
EN
61000
-6-3
A
PPR
OV
ALS
Read installation
instruction
s
before
conn
ecting to mains
MIT S U
BIS
HI
EL
ECT R
IC
E UR O
PE
PS U
25
In
pu
t: 10
0-240
V~
/ 1
.2-0.5
A/ 5
0-
60
Hz
Op
er
atio
nalV
o
ltag
e:85-264
V~ / Derating
:<
90
V~ 2,5
%/V
O
utp
ut:
24
V
/ 2.5
A
Madeb
y PHOEN
IX CON
T
ACT
2868839
-25 ..
. +
70°C
-1
3
...
+158°F
>+55°C
>+13
1°F
De
ra
ting: 2,5%/K
InputAC
100-240V
PSU 25
Adjust
22.5-29.5V
DC OK
Output DC
24V 2.5A
…
+
…
+
…
L
N
Automation Book_UK_2008.prn
Automation Book_UK_2008
Dienstag, 8. April 2008 18:32:34
Farbprofil: Deaktiviert
Komposit Standardbildschirm