Technical information

86
MITSUBISHI ELECTRIC
INVERTER
/// INVERTER
Internal and External Options
A large number of options allows an indi
-
vidual adoption of the inverter to the
according task. The options can be
installed quickly and e asily. Detailed
information on installation and func tions
is included in the manual of the options.
The options can be divided into two
major categories:
앬
Internal options
앬
External options
Internal options
The internal options comprise input and
output ex tensions as well as communica
-
tions options supporting the operation
of the inverter within a network or con
-
nected to a personal computer or PLC.
External Options
In addition to the FR-PU07 control panel
that enables interactive operation of the
frequency inver ter the available external
options also include additional EMC
noise filters, reactors for improving
efficiency and brake units with brake
resistors.
1
Option Description
FR-D700 FR-S500E FR-E700 FR-E500 FR-F700 FR-A700
Internal
options
Digital input Input of the frequency setting via BCD orbinary code
——쏹 — 쏹쏹
Digital output
Selectabl estandard output signalsof theinvertercan be output at theopen
collector.
——쏹 — 쏹쏹
Expansion analog output
Selectable additional signalscan be output and indicatedat the
analog output.
——쏹 — 쏹쏹
Relay output
Selectablestandard output signals of theinverter can beoutput through relay
terminals.
——쏹 — 쏹쏹
Orientationcontrol,
Encoder feedback contro (PLG),
Vector control
This option is used for position control and precise speed control.
—————쏹
Communi-
cations
SSCNET Integration of a frequency inverter into a SSCNET.
—————쏹
Profibus/DP Integration of a frequency inverterinto a Profibus/DP network. ——쏹 쏹쏹쏹
DeviceNet
TM
Integration of a frequency inverter into a DeviceNet. ——쏹 쏹쏹쏹
CC-Link Integrationof a frequencyinverter into aCC-Link network. ——쏹 쏹쏹쏹
LonWorks Integration of a frequency inverter into a LonWorks network. ——쏹 — 쏹 —
CANopen Integration of a frequency inverter into a CANopen network. ——쏹 쏹 — 쏹
Ethernet Integration of a frequency inverter into a Ethernet network. ——쏹 — 쏹쏹
Option Description
FR-D700 FR-S500E FR-E700 FR-E500 FR-F700 FR-A700
External
options
Control panel (8 languages) Interactive control panel with LCD display. 쏹쏹쏹쏹쏹쏹
VFD-Setup-Software
Parameterization and setup software forthe Mitsubishi Electric inverter series.
— 쏹 — 쏹쏹쏹
FR-Configurator software — 쏹 — 쏹쏹쏹
EMC noise filter Noise filterfor compliancewith EMC directives. 쏹쏹쏹쏹쏹쏹
Externalbrake resistor
To improve the brake capacity of the inverter. Depending on the inverter type
it is used in combinationwith a brakeunit.
쏹쏹쏹쏹쏹쏹
External high-duty brake resistor
To improve thebrake capacity; usedin combination withthe internal brake
transistor.
쏹 — 쏹 쏹 — 쏹
DC reactor
AC chokes
For increased efficiency, reduction of mains feedback and compensation of
voltage fluctuations.
쏹쏹쏹쏹쏹쏹
Floor standing unit FSU
IP 20physical contact protection in a freely-locatable floor-
standing unit. Detailed information on request.
————
쏹쏹
Mounting example
of an internal option
NET_A
NET_B
FG
D199K3C
ECHELON
FTT-10A
50051
T0121B
CON2
3
1
FR-A7NL
LW
ON ORKS
®
Interface
RUN–
LRUN–
TX–
SERVICE–
RX–
WINK–
1
Automation Book_UK_2008.prn
Automation Book_UK_2008
Dienstag, 8. April 2008 18:25:48
Farbprofil: Deaktiviert
Komposit Standardbildschirm