Instruction manual

8. OUTPUT MODULES
8 − 50
(3) Instructions
(a) In the test mode using the peripheral device, a cam data/limit switch output
data batch-change request is invalid.
CAUTION
As an interlock, provide test mode judgment (M9075) in the cam data/limit switch output data batch-
change request program.
(b) While the cam data/limit switch output data are being imported to the PCPU
(while M2056 is ON), the real mode cannot be switched to the virtual mode.
As an interlock, provide the cam data batch-change request flag (M2056) in
the real mode to virtual mode change program.
(4) Error factors
The following are the error factors in a cam data/limit output data batch-change
request (M2056: OFF → ON).
(a) Cam data is being written from peripheral device
(b) Registration code of file register's registration code storage area is not
normal
(c) Cam data size in file register's cam data size storage area is outside the
range 144 to 33434 or odd bytes.