Instruction manual

8. OUTPUT MODULES
8 − 47
(1) Write of cam data/limit switch output data to block No. 10 to No. 18 of extended
file register area
Cam data can be written using:
• Sequence program
• Peripheral device
• Personal computer
(a) Write using sequence program
Using the transfer or exchange instruction for the cam data/limit switch output
data stored in another extended file register, rewrite the cam data/limit switch
output data in block No. 10 to No. 18 of the extended file register area.
At execution of
exchange instruction
Sequence program
Cam data/limit switch
output data
Other than extended file register
area block No. 10 to No. 18
Cam data/limit switch
output data
Extended file register area
block No. 10 to No. 18
Sequence program
area
At execution of
transfer instruction
[Memory cassette]
Write can be executed using the dedicated instruction.
(b) Write using peripheral device
Using the IBM PC booted with SW2SRX-GSV22PE, write the cam data/limit
switch output data.
For operations of the IBM PC, refer to the SW2SRX-GSV22PE or SW0IX-
CAMPE Operating Manual.
IBM PC/AT
Write
Read
Memory cassette
A273UHCPU
Extended file
register area
block No.10
to No.18