Instruction manual

7. TRANSMISSION MODULE
7 − 17
(e) Clutch ON/OFF control is exercised per operation cycle. For the specified
travel value at which the clutch status turns from OFF to ON to OFF during
one operation cycle, internal control is performed properly but the clutch
status device remains unchanged.
(OFF)
There is no transmission value when 1) is 0
.
Drive module current value
Clutch status
Clutch status device
Number of pulses in this area is transmitted.
Operation cycle
1)
(f) If the clutch ON/OFF command device is ON as soon as the "mode setting
device" value changes to "3", clutch ON/OFF control is started in
accordance with the preset data.
3
1) Specified after-clutch ON travel value, 2) Specified before-clutch ON travel value
Mode setting device value
Drive module current value
Clutch ON command
device
Clutch status
1)
2)
(g) If the clutch ON/OFF command device is OFF and the clutch status is ON
as soon as the "mode setting device" value changes to "3", the clutch status
turns OFF.
3
(OFF)
Clutch status
Mode setting device value
Drive module current value
Clutch ON command device