User`s guide
Table Of Contents
- E-Designer Reference Manual
- 1 Installation
- 2 General
- 3 Configuration with the Configuration Tool
- 3.1 Starting the Configuration Tool
- 3.2 Selecting Menu Language
- 3.3 Creating a Project
- 3.4 Saving a Project
- 3.5 Updating Drivers
- 3.6 Changing Project Properties
- 3.7 The Project Manager
- 3.8 The Block Manager
- 3.9 Showing Operator Panel around the Working Area
- 3.10 Configuration of Blocks
- 3.11 Using Text Blocks
- 3.12 Static Symbols
- 3.13 Changing I/Os
- 3.14 The I/O Browser
- 3.15 Changing BDTP Station
- 3.16 I/O Cross Reference
- 3.17 Other Managers/Editors
- 3.18 The File Menu
- 3.19 The Edit Menu
- 3.20 The View Menu
- 3.21 The Functions Menu
- 3.22 The Setup Menu
- 3.23 The Block Manager menu
- 3.24 The Object menu
- 3.25 The Layout Menu
- 3.26 The Project Menu
- 3.27 The Transfer Menu
- 3.28 The Window Menu
- 3.29 The Help Menu
- 4 Graphic Presentation and Maneuvering
- 5 Text-based Presentation for Printouts and Reports
- 6 Trends
- 7 Message Library
- 8 Alarm Management
- 9 Recipes
- 9.1 Calculation of Recipe Size
- 9.2 Recipe Properties and Recipe Directory
- 9.3 Creating a Recipe with the Operator Panel
- 9.4 Appending Recipes
- 9.5 Transferring Recipes to the Controller
- 9.6 Deleting Recipes
- 9.7 Using Recipes in a PC
- 9.8 Creating and Transferring Recipes with the Controller Program
- 9.9 Saving Individual Recipes on an External Memory Card in Runtime
- 10 Data Logger
- 11 Passwords
- 12 Printouts from the Operator Panel
- 13 Time Channels
- 14 Language Management
- 14.1 Unicode in the Operator Panel
- 14.2 Creating Additional Application Languages
- 14.3 Translating/Editing Texts in the Configuration Tool
- 14.4 Properties for the Application Language
- 14.5 Export
- 14.6 Import
- 14.7 Show Index
- 14.8 Cross Reference
- 14.9 Reuse Index
- 14.10 Font Templates
- 14.11 Unicode in E1012 and E1022
- 15 System Monitor
- 16 Index Addressing
- 17 Communication
- 18 Network Communication
- 19 Network Functions in the Operator Panel
- 20 LEDs
- 21 Function Keys
- 22 Macros
- 23 Project Transfer
- 24 Transfer of Controller Program and Parameters
- 25 Updating the Operator Panel
Configuration with the Configuration Tool
Mitsubishi Electric, MA00759F 67
Controller register:
Enter the start address for storage of the date/time in the controller.
When this function is used, the operator panel clock will be written to 7 consecutive
registers according to the table below.
Use SNTP time sync
Check the box if the panel’s clock should be synchronized against an external SNTP
server (Simple Network Time Protocol).
Server name:
The address of the SNTP server.
Update interval (minutes):
State the interval of how often the synchronization should be performed. Values
below five minutes will not generate any synchronization at all.
Daylight saving:
The start and end of summer or daylight saving time are defined here. State the Day
of week, Week In Month, Month, Hour and Adjust. You can choose between
European and US standard.
To disable the function for summer time leave both fields for the month blank.
Online Properties
Permits changing of the selected function in the operator panel.
Controller Register CR Clock Part
CR Seconds
CR+1 Minutes
CR+2 Hours
CR+3 Day
CR+4 Month
CR+5 Year
CR+6 Day of week (1-7 where 1 is Sunday)
Note:
If the time difference in the operator panel compared to the SNTP server exceeds 24
hours, no time synchronization will be performed, since this will be regarded as an in-
tented setting in the operator panel project.