User`s guide
Table Of Contents
- E-Designer Reference Manual
- 1 Installation
- 2 General
- 3 Configuration with the Configuration Tool
- 3.1 Starting the Configuration Tool
- 3.2 Selecting Menu Language
- 3.3 Creating a Project
- 3.4 Saving a Project
- 3.5 Updating Drivers
- 3.6 Changing Project Properties
- 3.7 The Project Manager
- 3.8 The Block Manager
- 3.9 Showing Operator Panel around the Working Area
- 3.10 Configuration of Blocks
- 3.11 Using Text Blocks
- 3.12 Static Symbols
- 3.13 Changing I/Os
- 3.14 The I/O Browser
- 3.15 Changing BDTP Station
- 3.16 I/O Cross Reference
- 3.17 Other Managers/Editors
- 3.18 The File Menu
- 3.19 The Edit Menu
- 3.20 The View Menu
- 3.21 The Functions Menu
- 3.22 The Setup Menu
- 3.23 The Block Manager menu
- 3.24 The Object menu
- 3.25 The Layout Menu
- 3.26 The Project Menu
- 3.27 The Transfer Menu
- 3.28 The Window Menu
- 3.29 The Help Menu
- 4 Graphic Presentation and Maneuvering
- 5 Text-based Presentation for Printouts and Reports
- 6 Trends
- 7 Message Library
- 8 Alarm Management
- 9 Recipes
- 9.1 Calculation of Recipe Size
- 9.2 Recipe Properties and Recipe Directory
- 9.3 Creating a Recipe with the Operator Panel
- 9.4 Appending Recipes
- 9.5 Transferring Recipes to the Controller
- 9.6 Deleting Recipes
- 9.7 Using Recipes in a PC
- 9.8 Creating and Transferring Recipes with the Controller Program
- 9.9 Saving Individual Recipes on an External Memory Card in Runtime
- 10 Data Logger
- 11 Passwords
- 12 Printouts from the Operator Panel
- 13 Time Channels
- 14 Language Management
- 14.1 Unicode in the Operator Panel
- 14.2 Creating Additional Application Languages
- 14.3 Translating/Editing Texts in the Configuration Tool
- 14.4 Properties for the Application Language
- 14.5 Export
- 14.6 Import
- 14.7 Show Index
- 14.8 Cross Reference
- 14.9 Reuse Index
- 14.10 Font Templates
- 14.11 Unicode in E1012 and E1022
- 15 System Monitor
- 16 Index Addressing
- 17 Communication
- 18 Network Communication
- 19 Network Functions in the Operator Panel
- 20 LEDs
- 21 Function Keys
- 22 Macros
- 23 Project Transfer
- 24 Transfer of Controller Program and Parameters
- 25 Updating the Operator Panel
Configuration with the Configuration Tool
Mitsubishi Electric, MA00759F 35
Printout
The following properties are defined under the Printout tab:
Print signal:
A digital signal which, when activated, results in the block being printed out on a
connected printer. Display signal and Print signal can be the same. Print signals in
consecutive order should be used to obtain the fastest possible printouts.
Completion signal:
A digital signal activated by the operator panel when the printout is ready. The signal
is normally set to one. If the box Reset is marked, the signal will be reset when the
printout is ready.
E-mail
The E-mail tab is available for text blocks only. Not available for E1012 and E1022.
The following properties can be defined:
Send mail signal:
The text block is sent as an e-mail message when the given digital signal is set to one.
The block name corresponds to the e-mail message subject.
Mail completion signal:
A digital signal activated by the operator panel when the message has been sent. The
signal is normally set to one. If the box Reset is marked, the signal will be reset when
the message has been sent.
Mail to address:
The address of the e-mail recipient is given here. Select up to 8 recipients from the
list shown when clicking the ... button. The list of e-mail addresses is defined under
Setup/Network/Services/SMTP Client. See section SMTP Client for information.
Attach file:
The name of a trend or recipe file to be attached with the message is given here. If
there is a trend file or a recipe file with the same name, the trend file will be sent.
Access
The following properties are defined under the Access tab:
Security Level:
A security level (0-8) for the block is defined. If a security level other than 0 is stated,
the operator must log in with a password corresponding to the given security level or
higher.
Local function keys
Local function keys for the block can be defined under the Local function keys tab.
See the chapter Function Keys for information. See also section The Block List.
Note:
Only text blocks can be sent as e-mail messages.